Auxiliary Dc Jack - Yamaha FJR1300AS Owner's Manual

Auxiliary DC jack

This vehicle is equipped with an auxilia-
ry DC jack in the accessory box.
A 12-V accessory connected to the
auxiliary jack can be used when the key
is in the "ON" position and should only
be used when the engine is running.
CAUTION:
The accessory connected to the
auxiliary DC jack should not be used
with the engine turned off, and the
load must never exceed 30 W (2.5 A),
otherwise the battery may dis-
charge.
To use the auxiliary DC jack
1. Open the accessory box lid. (See
page 3-26.)
2. Turn the key to "OFF".
3. Remove the auxiliary DC jack cap.
INSTRUMENT AND CONTROL FUNCTIONS
EAU39651
ECA15430
1. Auxiliary DC jack cap
4. Insert the accessory plug into the
auxiliary DC jack.
1. Auxiliary DC jack
5. Turn the key to "ON", and then
start the engine. (See page 5-1.)
To prevent electrical shock or short-
circuiting, make sure that the cap is
installed when the auxiliary DC jack
is not being used.
3-35
WARNING
EWA14360
3