Yamaha FJR1300AS Owner's Manual page 25

G
The accuracy of the temperature
reading may be affected when
riding slowly (approximately under
20 km/h) or when stopped at traffic
signals, railroad crossings, etc.
Instantaneous fuel consumption mode
1. Instantaneous fuel consumption
The instantaneous fuel consumption
display can be set to either "km/L" or
"L/100 km".
G
When the display is set to "km/L",
the distance that can be traveled
on 1.0 L of fuel under the current
riding conditions is shown.
INSTRUMENT AND CONTROL FUNCTIONS
G
When the display is set to "L/100
km", the amount of fuel necessary
to travel 100 km under the current
riding conditions is shown.
NOTE:
G
To switch between the two instan-
taneous fuel consumption dis-
plays, push the "RESET" button for
1 second when either display is
shown.
G If traveling at speeds under 10
km/h, "_ _._" will be displayed.
Average fuel consumption mode
1. Average fuel consumption
This display shows the average fuel
consumption since it was last reset.
3-11
The average fuel consumption display
can be set to either "AV_ _._ km/L" or
"AV_ _._ L/100 km".
When the average fuel consumption
mode is selected, the display flashes
for five seconds, and then, depending
on the unit set, "AV_ _._ km/L" (aver-
age distance that can be traveled using
1.0 L of fuel) or "AV_ _._ L/100 km" (av-
erage amount of fuel necessary to trav-
el 100 km) is displayed.
To reset the average fuel consumption
display, push the "RESET" button to se-
lect the mode again, and then push the
"RESET" button for 1 second while the
display is flashing.
NOTE:
G To switch between the two aver-
age fuel consumption displays,
push the "RESET" button for 1
second when either display is
shown.
G After resetting an average fuel
consumption display, "_ _._" will
be shown for that display until the
vehicle has traveled 1 km.
3