Yamaha FJR1300AS Owner's Manual page 38

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Rider seat height position adjuster
3. Move the rider seat holder cover to
the lower position as shown.
1. Rider seat holder cover
4. Install the rider seat height position
adjuster so that the "H" mark is
aligned with the match mark.
1. Rider seat height position adjuster
2. "H" mark
3. Match mark
5. Insert the projection on the front of
the rider seat into seat holder B as
shown.
1. Projection
2. Seat holder B (for high position)
3. Rider seat holder cover
3-24
6. Align the projection on the bottom
of the rider seat with the "H" posi-
tion slot, and then push the rear of
the seat down to lock it in place as
shown.
1. "H" position slot
7. Install the passenger seat.
To change the rider seat height to
the low position
1. Remove the rider seat. (See page
3-22.)
2. Remove the rider seat height posi-
tion adjuster by pulling it upward.
3. Move the rider seat holder cover to
the upper position.
4. Install the rider seat height position
adjuster so that the "L" mark is
aligned with the match mark.