Yamaha FJR1300AS Owner's Manual page 26

INSTRUMENT AND CONTROL FUNCTIONS
CAUTION:
If there is a malfunction, "– –.–" will
be displayed. Have a Yamaha dealer
check the vehicle.
Ambient temperature,
neous fuel consumption and aver-
3
age fuel consumption modes (for
the UK only)
1. Ambient temperature/instantaneous fuel
consumption/average fuel consumption
2. "SELECT" button
3. "RESET" button
Push the "RESET" button to switch the
display between the ambient tempera-
ture mode "Air", the instantaneous fuel
ECA15472 consumption mode "MPG" and the av-
erage fuel consumption mode "AV_ _._
MPG" in the following order:
Air → MPG → AV_ _._ MPG → Air
Ambient temperature mode
instanta-
1. Ambient temperature
This display shows the ambient tem-
perature from –9 °C to 50 °C in 1 °C in-
crements. The temperature displayed
may vary from the ambient tempera-
ture.
NOTE:
G If the ambient temperature falls be-
low –9 °C, a lower temperature
than –9 °C will not be displayed.
Instantaneous fuel consumption mode
1. Instantaneous fuel consumption
This display shows the distance that
can be traveled on 1.0 Imp.gal of fuel
under the current riding conditions.
3-12
G
If the ambient temperature climbs
above 50 °C, a higher temperature
than 50 °C will not be displayed.
G The accuracy of the temperature
reading may be affected when
riding slowly [approximately under
20 km/h (12.5 mi/h)] or when
stopped at traffic signals, railroad
crossings, etc.