Yamaha FJR1300AS Owner's Manual page 22

INSTRUMENT AND CONTROL FUNCTIONS
G
a fuel reserve tripmeter (which
shows the distance traveled on the
fuel reserve)
G a clock
G a fuel meter
G
a coolant temperature meter
G
a transmission gear display
G
an ambient temperature display
3
G
a fuel consumption display (instan-
taneous and average consumption
functions)
G
a self-diagnosis device
NOTE:
Be sure to turn the key to "ON" before
using the "SELECT" and "RESET" but-
tons.
Odometer and tripmeter modes
1. Odometer/tripmeter/fuel reserve tripmeter
2. "SELECT" button
3. "RESET" button
Pushing the "SELECT" button switches
the display between the odometer
mode "ODO" and the tripmeter modes
"TRIP 1" and "TRIP 2" in the following
order:
ODO → TRIP 1 → TRIP 2 → ODO
NOTE:
When selecting "TRIP 1" or "TRIP 2",
the display flashes for five seconds.
When approximately 5.5 L (1.45 US
gal) (1.21 Imp.gal) of fuel remains in the
fuel tank, the display will automatically
change to the fuel reserve tripmeter
mode "F-TRIP" and start counting the
3-8
distance traveled from that point. In that
case, pushing the "SELECT" button
switches the display between the vari-
ous tripmeter and odometer modes in
the following order:
F-TRIP → ODO → TRIP 1 → TRIP 2 →
F-TRIP
To reset a tripmeter, select it by push-
ing the "SELECT" button, and then
push the "SELECT" button for at least
one second while the display is flash-
ing. If you do not reset the fuel reserve
tripmeter manually, it will reset itself au-
tomatically and the display will return to
the prior mode after refueling and trav-
eling 5 km (3 mi).