Switching The Stop+Go Function On And Off; Automatic Warm Up Function And Power Function - AEG FM 4803 K-AN Installation And Operating Instructions Manual

Switching the STOP+GO function on and off

The STOP+GO function simultaneously switches all cooking zones that
are switched on to the keep warm setting and then back to the heat
setting that was previously set. This function can be used to briefly in-
terrupt and then continue the cooking process e.g. to take a telephone
call.
To switch
on
To switch
off
3
Timer functions are not stopped by STOP+GO.
3
STOP+GO locks the whole control panel except the sensor field

Automatic warm up function and Power function

The sensor field
warm up function. Both functions make more power available to the
cooking zone for a short time.
Function
Automatic warm up
function
Power function
Control panel
Touch STOP+GO
Touch STOP+GO
controls the Power function and the Automatic
Condition
A heat setting from 1
to 8 is set
Heat setting 0 or 9 is
Display
u
heat setting that was previ-
ously set (not automatic
warm up function)
Appliance heats on
heat setting 9 until
the requested heat
setting is reached
Appliance heats for
set a maximum of 10
minutes on heat set-
.
Result
ting p.
9