Switching The Stop+Go Function On And Off; Using The Automatic Warm-Up Function - AEG 68031K-MN User Manual

Switching the STOP+GO function on and off

The STOP+GO function simultaneously switches all cooking zones that are
switched on to the keep warm setting and then back to the heat setting that
was previously set.
To switch on Touch
To switch off Touch
3
Timer functions are not stopped by STOP+GO.
3
STOP+GO locks the whole control panel except the sensor field

Using the automatic warm-up function

All cooking zones are equipped with an automatic warm-up function. When set-
ting a heat setting using the automatic warm-up function, the cooking zone
switches to full power for a certain amount of time and then automatically
switches back to the heat setting set.
Step
1.
2.
The length of time that the automatic warm up function operates depends on
the heat setting selected.
Control panel
Control panel
Touch
Move your finger down from
lect the desired heat setting between
and
Operating the appliance
Display
heat setting that was previously
set (not automatic warm up func-
tion)
Display
to se- / ,
after 5 seconds
As long as
the appliance works at full
power.
After the automatic warm
up is completed, the heat
setting
played again.
11
.
.
is displayed,
/ is dis-