Important Safety Instructions - Akai CT-S21MTD-E3 Operator's Manual

IMPORTANT SAFETY INSTRUCTIONS

1. READ INSTRUCTIONS- All the safety and operating instructions should be read before the
product is operated.
2. RETAIN INSTRUCTIONS- The safety and operating instructions should be retained for future
reference.
3. HEED WARNINGS- All warnings on the product and in the operating instructions should be
adhered to.
4. FOLLOW INSTRUCTIONS- All operating and use instructions should be followed.
5. CLEANING-Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
6. ATTACHMENTS- Do not use attachments not recommended by the product manufacturer as
they may cause hazards.
7. WATER AND MOISTURE- Do not use this product near water-for example, near a bath tub,
wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the
like.
8. ACCESSORIES- Do not place this product on an unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a child or adult, and serious damage to the
product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer,
or sold with the product. Any mounting of the product should follow the manufacturer's
instructions, and should use a mounting accessory recommended by the manufacturer.
A Product and Cart Combination Should Be Moved with Care- Quick stops, excessive
force and uneven surfaces may cause the product and cart combination to overturn.
9. VENTILATION- Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from overheating, and these openings must
not be blocked or covered. The openings should never be blocked by placing the product on a
bed, sofa, rug or other similar surface. This product should not be placed in a built-in
installation, such as a bookcase or rack, unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
10.POWER SOURCES - This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For products intended to operate from
battery power, or other sources, refer to the operating instructions.
11.GROUNDING OR POLARIZATION- This product may be equipped with a polarized
alternating-current line plug ( a plug having one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety feature: If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION- Power-supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the point where exit from the product.
13. NONUSE PERIODS - The power cord of the product should be unplugged from the outlet
when left unused for long periods of time.
14. OUTDOOR ANTENNA GROUNDING- If an outside antenna or
cable system is connected to the product, be sure the antenna
or cable system is grounded so as to provide some protection
against voltage surges and built-up static charges Article 810
of the National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast and
GB - 3