Operator’ s manual COLOUR TELEVISION CT-T29S32S Operator’ s manual 1~15...
Please read this user manual before using your television. By following the instructions and operating hints, you will ensure top performance for many years. Keep this manual in a safe place. Contents - 2 -...
For your safety reason The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of CAUTION uninsulated¡°dangerous voltage¡±within RISK OF ELECTRIC SHOCK the product’ s enclosure that may be of DO NOT OPEN sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTION INSTRUCTIONS PERTAINING TO A RISK OF FIRE, Lightning or Nonuse Periods-For added protection for ELECTRIC SHOCK, OR INJURY TO PERSONS. this appliance during a lightning storm, or when it is left unattached for long periods of time, unplug it from the wall WARNING-When using electric products, basic outlet and disconnect the antenna or cable system.
Connections Connecting the antenna cable TV rear panel Antenna jack Connecting a video recorder antenna cable to the TV VCR or Video recorder Antenna RF Out TV rear panel Antenna jack Connecting video devices to TV On the rear panel VCR or Audio Amplifiers etc.
On the side panel To audio input To audio output Handy camera, Game device TV side panel etc. To video input To video output Connecting the mains plug Parts identification TV front and side panels 1. Power button TV front panel 2.
Remote control 1. Standby button to switch off to standby and power on from standby 2. Sound Mute button to mute and restore sound 3. Number buttons (0-9) to select a TV channel or switch on from standby ( “ 0 ” button with AV function) 4.
Tuning the channels On TV mode, press the MENU button to enter the first menu, and press the cursor button down to select the menu line Setup, then press the OK button to enter the second menu. The TV can return to the normal TV mode by pressing the MENU button. Picture System The first menu...
Press the OK button, the TV will start to tune all the available TV channels automatically. Please Wait . . . VHFL ! ! ! ! ..When tuning is finished, the TV will return to the normal TV mode at the first station which can be received in your area.
Daily use Switching the TV on and off To switch on Press the power button on the main unit to turn the TV on. To switch on from standby Press the standby button, number buttons or cursor buttons (up/down) on the remote control or program buttons on the front panel to turn the TV on from standby mode.
B. To step up and down programs During the normal TV program reception, each time press the cursor button (up/down) on the remote control or the program buttons on the front panel, the on-screen display will change as follows: Max. Program Min.
I.P.C.(Intelligent Picture Control) Function There are four different picture settings available. Personal (adjustable picture level) I.P.C Natural (natural picture level) Sharp (a daylight level) Natural Cinema (a setting for viewing in a dimly lit room) Select the required setting from the four alternatives by pressing the I.P.C.
Before calling a serviceman SYMPTOM CHECK Picture Sound Snowy picture Distorted sound Multiple image Normal sound Interference Distorted sound on screen Distorted or Normal picture no sound No picture No sound No colour Normal sound Normal or low ’ No picture level sound Coloured stains Normal sound...
AKAI ELECTRIC CO., LTD. JAPAN www.akai.com - 15 -...