Contents Features ............... 43 Picture Settings Menu Items ......60 PC Picture Settings........... 60 Introduction ............43 Configuring Sound Settings ........61 Preparation ............43 Operating Sound Settings Menu Items ..... 61 Safety Precautions ..........43 Sound Settings Menu Items......61 Information for users in the EU ......
Features Introduction • Remote controlled colour LED TV. Thank you for choosing this product. This manual will guide you through the proper operation of your • Fully integrated Terrestrial digital-cable TV (DVB-T TV. Before operating the TV, please read this manual MPEG2) thoroughly.
can cause fire or give you an electric shock. When it is materials, such as a foil bag, must be kept away damaged and needs to be replaced, it should be done from children. by qualified personnel. • Batteries, including those which are heavy metal- free, should not be disposed of with household Moisture and Water waste.
Connection to a cable distribution system has Package Contents therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11). INFO SLEEP SCREEN SOURCE PRESETS LED TV RETURN MENU Electrical devices not in the hands of children Instruction Book Never let children use electrical devices unsupervised.
Environmental Information • This television is designed to consume less energy to save the environment. You not only help to save the environment but you can also save money by reducing electricity bills thanks to the energy efficiency features of this TV. To reduce energy consumption, you should take the following steps: •...
Remote Control Buttons 1. Standby 2. Image size 3. Sleep timer 4. Numeric buttons 5. Return / Exit / Index page (in TXT mode) 6. Cursor up 7. Cursor left 8. Programme up /Page down Programme down /Page up 10. Mono-Stereo / Dual I-II / Current language (*) (in DVB channels) 11.
TV and Operating Control Switch FRONT and REAR VIEW Control switch VIEW Control Switch 1. Up direction 2. Down direction 3. Programme/Volume / AV / Standby-On selection switch Note: You can move the switch, upward or downward to change the volume. If you want to change channels, press the middle of the switch once (Position 3) and then move upward or downward.
4. VGA Input is for connecting a personal computer to the TV set. Connect the PC cable between the PC INPUT on the TV and the PC output on your PC. Note: You can use YPbPr to VGA cable (not supplied) to enable YPbPr signal via VGA input. WARNING: You cannot use VGA and YPbPr at the same time.
Note: If you connect a PC to the TV using HDMI Using USB Media connection, radio interference may occur. Therefore • You can connect USB devices to your TV by using this type of connection is not recommended. You the USB input of the TV. This feature allows you to should use VGA connection instead.
Connecting to a DVD Player Switching On/Off via HDMI To Switch the TV On • Connect the power cord to the 220-240V AC, 50 Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections.
Volume Setting Input Selection • Press “V+” button to increase the volume. Press “V-” Once you have connected external systems to button to decrease the volume. A volume level scale your TV, you can switch to different input sources. (slider) will be displayed on the screen. Press “SOURCE”...
be searched and results matching your criteria will be listed. (Now) : Shows the current programme. First Time Installation IMPORTANT: Ensure that the aerial is connected and a Common Interface module is not inserted before switching on the TV for the first time installation.
Select Automatic Channel Scan (Retune) by using “ ”/“ ” button and press OK button. Automatic Channel Scan (Retune) options will be displayed. You can select options by using “ ”/“ ” and OK buttons. Auto Channel Scan (Retune) Menu Operation To select the “Yes”...
Analogue Manual Search Operating the Channel List After selecting search type as analogue, you can use • Press “ ” or “ ” button to select the channel that “ ”/“ ” button to highlight an item and then press “ will be processed.
Locking a Channel Managing Stations: Sorting the You can press GREEN button to tag/untag all Channel List channels; YELLOW button to tag/untag a single channel. You can select broadcasts to be listed in the channel OLVW 7R GLVSOD\ VSHFL¿F W\SHV RI EURDGFDVW \RX VKRXOG •...
YELLOW button: Toggles viewing style. Media Playback Using Media BLUE button: Changes filter options. Browser If the USB stick is not recognized after power off/on or First Time Installation, unplug the USB device, turn the TV off and on again and re-insert the USB device. Play ( button): Starts the video playback.
Pause ( button) : Pauses the slideshow. Media Browser Settings Continue ( button) : Continues the slideshow. /RRS6KXIÀH *5((1 EXWWRQ: Press once to disable Loop. Press again to disable both Loop and Shuffle. Press once more to enable only Shuffle. Press again to enable all.
Cinema This zooms up the wide picture (16:9 aspect ratio) to the full screen. • For 16:9 aspect ratio pictures that have been squeezed into a normal picture (4:3 aspect ratio), use the 16:9 mode to restore the picture to its original shape.
Colour: Sets the colour value, adjusting the colors. Contrast, Brightness, Colour, Colour Temp and Picture Zoom settings in this menu are identical Power Save Mode: Use “ ” or “ ” button to select to settings defined in TV picture menu under “Main Power Save Mode.
• Use “ ” or “ ” button to set an item. programmes (For instance, volume level of advertisements tend to be louder than programmes). • Press “MENU” button to exit. Dynamic Bass: Dynamic Bass is used to increase Sound Settings Menu Items bass effect of the TV set.
Using a Conditional Access &RQ¿JXULQJ /DQJXDJH Module (not included) Preferences IMPORTANT: Insert or remove the CI module only You can operate the TV’s language settings using when the TV is SWITCHED OFF. this menu. • In order to watch certain digital channels, a conditional Press “MENU”...
Language Settings After coding the correct PIN number, parental settings menu will be displayed: Parental Settings Menu Operation • Select an item by using “ ” or “ ” button. • Use “ ” or “ ” button to set an item. In the configuration menu, highlight the Language •...
Setting Programme Timers • Select YES by using “ ” or “ ” buttons to delete the timer. Select NO to cancel. You can set programme timers for a particular programme using this feature. &RQ¿JXULQJ 'DWH7LPH 6HWWLQJV Press “ ” button to set timers on an event. Programme Select Date/Time in the Settings menu to configure timer function buttons will be displayed on the Date/Time settings.
&RQ¿JXULQJ 2WKHU 6HWWLQJV To view general configuration preferences, select Other Settings in the Settings menu and press OK button. (optional) • Select Sources in the Settings menu and press OK button. Operation • Press“ ” or “ ” buttons to select a source. •...
Audio Description: Audio description refers to Other Features an additional narration track for blind and visually Displaying TV Information: Programme Number, impaired viewers of visual media, including television Programme Name, Sound Indicator, time, teletext, and movies. The description narrator talks through channel type and resolution information is displayed the presentation, describing what is happening on the on the screen when a new programme is entered or...
Page 27
Teletext Tips The teletext system transmits information such as Screen Care: Clean the screen with a slightly damp, news, sports and weather on your TV. Note that if the soft cloth. Do not use abrasive solvents as they may signal degrades, for example in poor/adverse weather damage the coating layer of the TV screen.
Appendix A: PC Input Typical Appendix B: AV and HDMI Signal Display Modes Compatibility (Input Signal Types) The display has a maximum resolution of 1920 x 1200. Source Supported Signals Available The following table is an illustration of some of the typical video display modes.
Appendix D: Software Upgrade Appendix C: Supported DVI Resolutions • Your TV is capable of finding and updating new software upgrades over broadcast channels. When connecting devices to your TV’s connectors by • For broadcast channels search, the TV looks at the using DVI to HDMI cables (not supplied), you can refer available channels stored in your settings.
Appendix E : Supported File Formats for USB Mode File Format Remarks Media Video Audio (Maximum resolution/Bit rate etc.) Extension .mpg, .mpeg MPEG1, 2 MPEG Layer 1/2/3 .dat MPEG1, 2 MAX 1920x1080 @ 30P 20Mbit/sec MPEG2 .vob MPEG2 Movie MPEG2 PCM/MP3 Xvid 1.00, Xvid 1.01, .avi...
Page 31
6SHFL¿FDWLRQV TV BROADCASTING PAL/SECAM B/G D/K K’ I/I’ L/L’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND NUMBER OF PRESET CHANNELS 1000 CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERATING VOLTAGE 220-240V AC, 50 Hz. AUDIO German + Nicam Stereo AUDIO OUTPUT POWER (W...
Page 32
Features Contents Features ............... 72 General Properties General Properties..........72 • DVD / CD / CD-R / CD-RW / MP3 / JPEG / MPEG Safety Information ..........73 playback. Notes on Discs ............. 73 • NTSC/PAL playback (according to disc content) On handling discs ..........
On cleaning Safety Information • Before playing, clean the disc with a cleaning cloth. CAUTION Wipe the disc from the center out. DVD Player is a class 1 laser product. However this product uses a visible laser beam which could cause hazardous radiation exposure.
DVD Control Panel Buttons A. Stop / Eject Stop playing disc / Eject or Load the disc Note: • You cannot eject the disc via the remote control. • While playing a file, you should press STOP button three times to eject. B.
General Operation You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your remote control. Below are main functions of commonly used remote control buttons. English - 75 -...
Reverse stepping is not available. General Playback For your convenience: Basic Play If you attempt to enter a number greater than the total Press on the power button time of the current title, the time search box disappears Please insert a disc to the loader. and “...
Preferences SPDIF OUTPUT You can set Spdif Output as PCM or RAW. If you select DEFAULT PCM from SPDIF Output in DVD menu and play DVD If you choose RESET and press SELECT, the factory- with Dolby audio, you can get audio output with two presets are loaded.
Some functions (Angle, Zoom etc) do DVD has a structure consisting of two 0.6-mm thin discs, which are adhered to each other. Since the not work thinner the disc, the higher the density at which the • These functions are not available on the DVD. information can be recorded, a DVD disc has a greater •...
Need help?
Do you have a question about the ALED3205TBK and is the answer not in the manual?
Questions and answers