Table of Contents
Advertisement
Duplicating a Video Tape
When you try to connect with a cable, make sure the power of both units have been turned off.
1
Load a blank cassette tape with the erase
prevention tab intact into the recording VCR. Load
the previously recorded cassette tape into the
playback VCR or a video camera.
2
Use AV or CH of the recording VCR to select the
"AU" rather than the preset channel.
Connection with second Video recorder
Playback unit
22
VCR
Recording unit
(not supply)
3
Press REC/OTR and then PAUSE/STILL of
Recording unit.
4
Press PLAY-button and then PAUSE/STILL-
button of Playback unit.
5
Press PAUSE/STILL of both units simultaneously
to start the Duplicating.
Note:
•
Before starting the duplicating process, select the
proper tape speed using SPEED SP/LP. For a pre-
recorded tape the correct tape speed will be set
automatically during playback.
•
Unauthorized recording of copyrighted television
programs, movies, video tapes and other materials
infringe on the rights of copyright owners and are
contrary to copyright laws.
Connection with Video camera
Playback on
camera
To AV socket
Recording unit
(not supply)
For duplicating a previously recorded tape from a
video camera, follow the video camera
manufacturer's instructions. A simple video camera
dubbing hookup is shown at left.
Advertisement
Table of Contents
