Connections - Akai QX-3700 Operator's Manual

Connections

Before connecting the system:
• Connect everything securely. Loose connections can lead to
malfunction or damage caused by a short circuit.
• Connect the power cord after all connections have been made.
• Connection will depend on which system you have (some of the
components may be optional).
Removing the flat cable
To remove the flat cable, pull it straight out while
pressing the tabs on its sides.
Antenna placement
Do not place the AM loop antenna on top of the tuner or any other
metal encased object as this could result in noise interference. It should
also not be placed near a CD player, computer or TV set.
The FM antenna should be attached to a wall etc., after being unwound
and extended to its full length.
FM antennas
FM broadcasts provide excellent sound quality, but in order to
take advantage of this ,the radio waves must be received properly.
Speaker cord connection
Speaker connector
Left
Right
Note: Connect the red wires to the¡°+¡±terminals.
FM wire antenna
- 3 -
Left
Right
AM loop antenna