Related Manuals for Akai QX-4200
Summary of Contents for Akai QX-4200
- Page 2 TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS IMPROTANT SAFETY INSTRUCTIONS ..............................2-3 ATTENTION: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside the unit. Refer all servicing to qualified personnel. PREPARATION FOR USE .......................................
- Page 3 15. LIGHTENING - For added protection for this product during a lightening storm, or when it is left unattended and unused for PREPARATION FOR USE long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will present damage to the product due to lightening and power-line surges.
- Page 4 CONTROLS IDENTIFICATION MULTI FUNCTION LCD DISPLAY X-BASS LED INDICATOR CD PLAY/PAUSE BUTTON CD STOP BUTTON PRESET STATION BUTTON AUX BUTTON MIX BUTTON REPEAT BUTTON PROG. / SET / MEMO BUTTON TUNING SKIP/FAST SEARCH BUTTON 11. EQ BUTTON 12. X-BASS BUTTON 13.
- Page 5 CONNECT THE HEADPHONE REMOTE HANDSET STAND BY : turn unit on/off (STANDBY mode) 1. This unit can accept stereo headphones (not included) with a 3.5 mm plug and an impedance of 32 ohms or greater. SKIP/SEARCH 2. Connect your headphone to the phones jack (13) of the unit, and the speakers will cut off automatically. skip the CD track or search within a track.
- Page 6 PRECAUTIONS FOR DISCS AUXILIARY INPUT This product can receive audio signals from other devices, such as TV, VCR, DVD player, tuner. To listen to such output, HANDLING DISC - To keep the disc clean, do not touch the play sides of the disc. Connect one end of a RCA plug signal wire (not included) into AUX IN jack (24), - Do not attach paper or ape to the disc.
- Page 7 CARE AND MAINTENANCE TROUBLESHOOTING GUIDE Caring for Compact Discs Should this unit exhibit a problem, check the following before seeking service. * Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the disc. * Do not attach adhesive tape, stickers, etc.
- Page 8 LABEL MENTION SPECIFICATION POWER SUPPLY : AC :230V ~ 50Hz (1) LASER CAUTION LABEL (5 LANGUAGE) (2) LASER BEAM LABEL OUTPUT POWER : 2 x 5 WATTS RMS DIMENSION : MAIN UNIT 160 (W) x 186 (H) x 241 (D) mm. SPEAKER BOX 150 (W) x 173 (H) x 193 (D) mm.