Daewoo DT-4242N User Manual page 41

3
Press the Power Buttons.
4
Enjoy Dynamic Ultra Screen Monitor by
5
Using PC's Keyboard or Mouse.
NOTES:
1) The resolution of the PC monitor is the best at 640 x 480 (VGA).
2) If there is a [Vertical Frequency]setting menu in the [Display]
menu of the PC, adjust the frequency to 60Hz.
3) If the PC resolution is too high, it may be hard to read letters.
Select a suitable resolution.
4) DVI input port receives only digital signal.
5) Depending on the graphic card when plugged or unplugged the
DVI connection the screen may not display correctly.
Restart the computer if this happens.
• Turn on the PDP and the PC.
Input Select
• Select [DVI] by pressing the
MULTIMEDIA
"MULTIMEDIA" button of the remote
control or the Input button on the PDP unit.
• Each time you press the "MULTIMEDIA"
button, a different input mode appears. The
sequence is as follows:
Component1
• N.B. : You cannot select PC or DVI if the
Component2
DVI PC
picture in picture mode is on.
41