Daewoo DT-4242N User Manual page 27

3
Input Select
• Select [Component 1 or Component 2] by
MULTIMEDIA
• Each time you press the "Multimedia" button,
• N.B. : You cannot select PC or DVI if the
4
NOTES:
1) Possible digital broadcasting signals: 1080i, 720p, 576p, 480p.
2) Antenna connection:
Apartment : Check if communal aerial receives digital broadcasts.
Private Houses: Set the indoor/outdoor UHF antenna to the direction
of the digital broadcasting transmitting company.
3) For detailed connection method, refer to the owner's manual of Digital
Broadcasting Receiver.
4) What is a component? : Signals with which luminance and
chrominance are separated, producing a sharp picture.
5) If the Digital Broadcasting Receiver has PC output terminal or DVI
output terminal, connect to 'PC INPUT' or 'DVI INPUT' at the rear of
the panel of the PDP.
When watching the PDP by PC or DVI Input, some undesired signals
may be seen at the top and bottom area of the screen. In this case,
select [Menu] --> [Screen] --> [V. Size] to adjust.
pressing the "Multimedia" button of the remote
control or using the "INPUT SELECT" button of
the PDP unit.
different input modes appear. The sequence is
as follows:
Component1 Component2
DVI
picture in picture mode is on.
Select the Desired Channel and Function
• Select the desired channel and function
by using the remote control of the Digital
Broadcasting Receiver.
PC
27