Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place.
Safety information Operating instructions Safety information Before the installation and use, read this manual carefully: • For your personal safety and the safety of your property. • For the respect of the environment, • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or sell it.
Safety information • Do not fill the rinse aid dispenser with other products than rinse aid, (e.g. dishwasher cleaning agent, liquid detergent). This can cause damage to the appliance. • Make sure that the spray arms can move freely before you start a washing programme. •...
Safety information – Contact the service centre to replace the water inlet hose with safety valve. WARNING! Dangerous voltage. Electrical connection • The appliance must be earthed. • Make sure that the electrical data on the rating plate agree with your domestic power supply.
Product description • Use only original spare parts. Disposal of the appliance • To prevent the risk of physical injury or damage: – Disconnect the mains plug from the mains socket. – Cut off the mains cable and discard it. –...
Control panel Rating plate Filters Lower spray arm Upper spray arm Top spray arm Worktop Control panel On/off button Scroll buttons Option button Cancel button OK/Start button Display The messages in the display and the audible signals help you to operate with the appliance. Scroll buttons With these buttons you can: •...
Control panel Cancel button Use this button to: • Cancel a washing programme or a delay start. Refer to 'Select and start a washing pro- gramme'. • To exit from the option menu. OK/Start button With this button you can: •...
Use of the appliance Display The small bars show the progress of the washing programme. Messages: washing programmes, optional functions and related programme phases show in this part of the display. Symbols Symbols DELAY START - comes on when the delay start is set and while the countdown operates. EXTRA HYGIENE - comes on when the related function and/or the INTENSIV PRO washing programme are set.
Setting the water softener Setting the water softener The water softener removes minerals and salts from the water supply. Minerals and salts can have a bad effect on the operation of the appliance. Equivalent scales measure the water hardness: • German degrees (dH°). •...
Use of dishwasher salt 3. Press the OK/Start button to confirm. 4. Go to WATER HARDNESS . 5. Press the OK/Start button to confirm. 6. Use the scroll buttons to set the level of the water softener. Refer to the chart for the right level to set.
Use of detergent and rinse aid Use of detergent and rinse aid Use of detergent To help the environment, do not use more than the correct quantity of detergent. Follow the detergent manufacturer recommendations on the detergent packaging. Do these steps to fill the detergent dispenser: 1.
Multitab function You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (highest dosage). Turn the rinse aid selector to increase or decrease the dosage. When the rinse aid dispenser is empty, the display shows a message: REFILL RINSE AID . The message does not show while a washing programme operates.
Washing programmes – Make sure that cutlery and dishes do not bond together. – Make sure that the glasses do not touch other glasses. – Put small objects in the cutlery basket. – Mix the spoons with other cutlery to prevent them from bonding together. –...
Select and start a washing programme Programme Degree of soil Type of load Programme descrip- EXTRA HYGIENE tion function PREWASH This programme gives dishes a 1 cold rinse Yes, without ef- quick rinse to prevent the remain- fect. ing food to bond on the dishes and bad odours to come out from the appliance.
Select and start a washing programme 3. Select, if necessary, options. Refer to 'Control panel'. 4. Select a washing programme. Refer to 'Washing programmes'. 5. Press the OK/Start button. The washing programme starts automatically. – If the delay start is set, the countdown starts automatically. When the countdown is completed, the washing programme starts automatically.
Care and cleaning Auto Off The Auto Off function automatically switches off the appliance 10 minutes after the end of the washing programme. This helps to decrease energy consumption. Remove the load • Let the dishes become cold before you remove them from the appliance. Hot dishes are easily damaged.
What to do if… 7. Put the filter (B) to its initial position. Make sure that it assembles correctly under the two guides (C). 8. Put the filter (A) into position in filter (B) and turn it clockwise until it locks. To clean the spray arms Do not remove the spray arms.
Page 19
What to do if… Malfunction Fault code Possible cause Possible solution The water inlet hose is Make sure that the wa- damaged. ter inlet hose has no damages. The appliance does not • An audible signal There is a blockage in Clean the sink spigot.
What to do if… The washing results and drying results are not satisfactory Problem Possible cause Possible solution The dishes are not clean. The selected washing pro- Make sure that the washing gramme was not applicable for programme is applicable for the the type of load and soil.
Technical data Technical data Dimensions Width 596 mm Height 850 mm Depth 625 mm Water supply pressure Minimum 0,5 bar (0,05 MPa) Maximum 8 bar (0,8 MPa) Cold water or hot water maximum 60 °C Water supply Capacity Place settings 1) Connect the water inlet hose to a water tap with a 3/4'' thread.
Installation Make sure that the dimensions of the recess agree with the dimensions in the picture. How to remove the appliance worktop 1. Remove the rear screws (1). 2. Pull the worktop from the behind of the appliance (2). 3. Lift the worktop and move it from the front slots (3).
Page 23
• A stand pipe with vent-hole. The internal di- ameter must be minimum 4 cm. max 85 cm Remove the sink plug when the appliance drains the water to prevent that the water goes back into the appliance. min 40 cm The drain hose extension must not be longer than 2 m.
Page 24
To buy accessories, consumables and spare parts at our online shop please visit: www.aeg- electrolux.co.uk...