Cleaning For The First Time - AEG COMPETENCE B 8100 Operating Insructions

Changing the Time
The time setting can be changed with the appliance either switched on
or off.
The time set is displayed in the temperature/time display.
1. Press the W button as often as necessary until the TIME function indi-
0
cator flashes.
2. Adjust the time as described above.

Cleaning for the first time

Before you use the oven for the first time, you should clean it
thoroughly. You can switch on the oven lighting to make cleaning eas-
ier.
1.Switch on the appliance using the mains but-
0
ton.
The mains pilot light above the button illumi-
nates.
2. Press the oven lighting L button.
3. Remove all accessories and the side rails, and wash with warm water
and washing up liquid.
4. Also wash out the oven with warm water and washing up liquid, and
dry.
5. Clean the front of the appliance with a damp cloth.
Tip: Use commercially available cleaner for stainless steel fronts that
3
also forms a protective film against finger marks.
Important: Do not use any caustic or abrasive cleaners! The surface
1
could be damaged.
Operating Instructions
17