Changing Automatic Function Entries; Deleting Automatic Function Entries; Information On The Automatic Function - AEG COMPETENCE B 8100 Operating Insructions

Operating Instructions

Changing Automatic Function Entries

You can still change the duration or the end of the cooking time during
cooking.
1. Using the clock W button select the COOK TIME or END COOK
0
function.
The corresponding function indicator starts to flash. The "Temperature/
Time Display" shows the remaining cooking time or the time entered
for the end of cooking.
2. Within 5 seconds press the + or - button until the duration or the
end of the cooking time is set to the new time you require.
Changes can only be made as long as the function indicators are flash-
3
ing.

Deleting Automatic Function Entries

0 Switch off the appliance using the mains button.

3 Information on the Automatic Function

• The maximum COOK TIME that can be set is 23 hours and 59 minutes.
• If the time when cooking is to end is set first, the clock automatically
calculates the maximum duration and suggests it. This COOK TIME
cannot be increased.
– Example: Current time: 14.00. END COOK entered: 16.00.
maximum possible COOK TIME: 2.00 hours.
• If the cook time is set first, the clock automatically calculates the
earliest possible time at which cooking can end and suggests it. This
END COOK time cannot be brought forward.
– Example: Current time: 14.00. COOK TIME entered: 3.00 hours. Earli-
est possible END COOK: 17.00.
24