Fast Warm Up; Using The Automatic Function - AEG COMPETENCE B 8100 Operating Insructions

Fast Warm Up R
Following selection of an oven function, the empty oven can be
pre-heated in a relatively short period of time using the function

"Fast Warm Up".

Important: Please only place the food to be cooked in the oven when
1
fast warm up is complete and the oven is running in the required func-
tion.
0 1. Set the required oven function (e.g. CONVENTIONAL). Change the sug-
gested temperature if necessary.
2. Press the fast warm up button R.
The indicator above the fast warm up button illuminates. Fast warm up
starts.
When the temperature set is reached, an acoustic signal sounds. The
indicator extinguishes.
The oven is now kept hot using the pre-set oven function and tempera-
ture. You can now put the food to be cooked in the oven.
The fast warm up function cannot be used with the grill, bottom heat
3
or defrost functions.
Please see the "Usage, Tables and Tips" section for recommendations on
fast warm up.

Using the Automatic Function

There are two possible ways of using the automatic function:
• Automatic Switch Off: When you have the oven switched on and
simply do not want to forget to switch it off at the right time, you
can use the clock to set either the duration or the end of the cook-
ing time. The oven then switches itself off automatically.
• Automatic Switching On and Off: When you, for example, in the
morning or at lunch time want to prepare a dish for the evening, you
can set the duration and also the end of the cooking time. The oven
then switches on automatically at the calculated start time, and
switches off again automatically at the end of cooking.
– Example: The roast requires cooking for 1 hour: COOK TIME = 1.00.
The roast should be ready at 18:00: END COOK = 18.00.
The oven function can be selected either before or after setting the
automatic function.
Operating Instructions
21