Making Drinks; Connecting The Filter Holder To The Main Boiler; Making A Drink Using Coffee Pods - Baumatic PECM1SS Instruction Manual

Making drinks

Connecting the filter holder to the main boiler

o Lift the filter holder (1) towards the filter holder ring nut (19);
making sure that it is in the position shown in the drawing
above.
o Continue lifting the holder until it locates inside of the ring nut.
o Turn the handle of the holder anti-clockwise, making sure that it
is fully secured.
o When you have finished using the holder, turn the handle
clockwise and remove it from the filter holder ring nut (19).
IMPORTANT: If the filter gets attached to the boiler, you
should carefully remove it. This is a result of a vacuum
being created during the espresso making process.

Making a drink using coffee pods

Coffee pods are an easy, practical and hygienic way to make coffee.
The packaging used for coffee pods does not allow excess coffee to
spill out and can be easily removed after use.
o IMPORTANT: If you are using Italian coffee
pods, then the filter for 1 Italian coffee pod (4)
must be used. If you are using French coffee
pods, then the filter for 1 French coffee pod (6)
must be used.
o For best results ensure that the coffee pods are used prior
to their use by date.
o Follow the instructions on filling the water reservoir (pages 11 –
14) and "Dispensing hot water through the main boiler" (page
15).
18