Adjusting The Flow Of The Water Boiler; Making Drinks; Connecting A Filter Holder - Baumatic BEC2.1SS Instruction Manual

o Before trying to dispense water again, wait until the red water
reservoir empty neon (28) stops flashing and the green water
boiler neon (25) stops flashing and remains lit.
o Before trying to dispense steam again, wait until the red water
reservoir empty neon (28) stops flashing. Then press the steam
boiler ON/OFF button (30). When the steam boiler neon (26)
stops flashing and remains lit, press the steam dispensing
ON/OFF button (31) to dispense steam.

Adjusting the flow of the water boiler

o It is possible to adjust the speed that water dispenses from the
water boiler at.
o To decrease the speed that water dispenses at, turn the water
flow control knob (32) anti-clockwise towards the minus (-)
symbol.
o After decreasing the speed that water dispenses at, if you wish
to increase it again. Turn the water flow control knob (32)
clockwise, back towards the plus (+) symbol.

Making drinks

Connecting a filter holder

o Lift the appropriate holder towards the filter holder ring nut (5),
making sure that it is in the position shown in the drawing
above.
o Continue lifting the holder until it locates inside of the ring nut.
o Turn the handle of the holder to the right, turning it fully so that
the holder is securely fixed into the ring nut.
o When you have finished using the holder, turn the handle to the
left and then remove it from the filter holder ring nut.
16