Intercom - AT&T E5901 User Manual

INTERCOM TO:
:
NOTE A maximum of
two handsets can be
used on an intercom
call at the same time,
and another handset
can be used on out-
side call at the same
time.
Telephone operation

Intercom

Use the intercom feature for conversations between
handsets.
1. Press INT. The screen of the originating handset
will show INTERCOM TO:.
2. Enter the destination handset number. The
display will show CALLING HANDSET X. The
destination handset will ring, and its screen
will show HANDSET X IS CALLING.
NOTES:
• Before the intercom call is answered, you can cancel the
intercom call by pressing
• If the destination handset is not answered within 100
seconds or if it is in the directory or call log mode, or out
of range, the originating handset will show the message
UNABLE TO CALL TRY AGAIN.
3. On the ringing destination handset, press INT,
PHONE/
FLASH
key (0-9, * or #) to answer the intercom call.
:
NOTE Pressing
rarily silence the intercom ringer.
To end the intercom call:
• Press OFF/
-OR-
• Place either handset in the charger or telephone
base.
Handling incoming calls
The telephone will beep if there is an outside call
during an intercom conversation. You can either:
PHONE/
• Press
and answer the incoming call.
-OR-
• Press INT or
com connection without answering the incoming
call. The incoming call will continue to ring.
16
OFF/
SPEAKER, or any dial pad
,
OFF/ or MUTE/
CLEAR
or INT on either handset.
CLEAR
to end the intercom call
FLASH
OFF/
to disconnect the inter-
CLEAR
or INT.
CLEAR
will tempo-
DELETE