Alarm Setting - Samsung SCP-2373 User Manual

setup
XXX Name
T
BACK SPACE CLR SET

ALARM SETTING

Alarm Enable
ON/OFF :
Enables or disables the Alarm function.
Alarm Input
MOD
Enables selecting an Alarm Input method.
- NO (Normally Open)
IN 1.2.3.....8
ALM GND
ALARM OFF
< Alarm input when N.O. is enabled >
- NC (Normally Closed)
IN 1.2.3.....8
ALM GND
ALARM OFF
< Alarm input when N.C. is enabled >
M

As shown in the picture above, the Alarm Input must be entered with the Open or Closed switch signals. Supplying power
without entering the signals may damage the product.
74_ setup
[ ]
M


IN 1.2.3.....8
ALM GND
IN 1.2.3.....8
ALM GND
When selecting the Camera Name and Preset Name, the screen displays the Left
keypad.
Names can be up to 12 characters and can be entered via the joystick and the Enter
key. Once a name is entered, use the joystick and the Enter key to perform the Set
command and save the name.
ALARM ON
ALARM ON
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Alarm Setting
Alarm Enable
Alarm Input
Alarm/AUX Output
MD Dwell Time
ALM Dwell Time
ALM MOD P SEQ. NO
IN1 OFF 1 OFF
IN2 OFF 2 OFF
IN3 OFF 3 OFF
.....
OFF
OFF
HOLD