Table of Contents
Advertisement
Functional Description
5) Alarm Setting
Alarm Enable : It can be determined whether to enable the alarm setting.
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
ON/OFF : Alarm is enabled in ON mode.
Alarm Input : Alarm Input Mode/Priority/Method is set up.
Alarm Setting
Alarm Enable
ON
Alarm Input
Alarm Output
MD Dwell Time
ON 30 SEC
NC/NO/OFF
: NC/NO/OFF can be selected depending on the alarm sensor.
1 - 4 (Priority) : Priority for the 4 alarm inputs is set up. Response comes first from
the alarm input of higher priority.
Preset/Swing/Group/Tour/Trace/A.Pan:
Whether to enable the operation of Preset/Swing/Group/Tour/Trace/A.Pan by
alarm input can be set up. When the alarm is input, it stays in the preset/Swing/
Group/Tour/Trace/A.Pan position.
SPEED DOME CAMERA
56
Alarm Setting
Alarm Enable
ON
Alarm Input
Alarm Output
MD Dwell Time
ON 30 SEC
Alarm Input
IN 1 OFF 1 OFF
IN 2 OFF 2 OFF
IN 3 OFF 3 OFF
IN 4 OFF 4 OFF
User's Manual
Alarm Out : One of the 2 Alarm Outs corresponds to each Alarm input.
Alarm Setting
Alarm Enable
ON
Alarm Input
Alarm Output
MD Dwell Time
ON 30 SEC
OUT1 SET/OUT2 SET
: One of the 4 Alarm Inputs corresponds to the 2 Alarm
Outputs.
OUT1 TIME/OUT2 TIME : For the 2 Alarm Outputs, On/Off and the operation time
can be set up in the units of second/minute/hour. (1-59
sec, 1-59 min, 1-59 hour)
OUT1 OFF/OUT2 OFF
: If you want to cancel the operating Alarm outputs at
once, select the corresponding menu to cancel the
operating Alarm.
MD Dwell Time : When the Motion Detection function is on, the motion of
intruders can be detected. When the motion is detected, the
Alarm signal is displayed in the Alarm Output Terminal. For
detailed settings of the Motion Detection for each Preset menu,
see page 43 and 44.
Alarm Setting
Alarm Enable
ON
Alarm Input
Alarm Output
MD Dwell Time
OFF
ON/OFF : It can be set up how long the operation will be kept when the
motion is detected. (1-59 sec, 1-59 min)
SPEED DOME CAMERA
57
Alarm Output
Setting 1
1
2
3
4
MD
Setting 2
1
2
3
4
MD
Timer
1 OFF
Timer
2 OFF
OUT Off 1
OUT Off 2
Alarm Setting
Alarm Enable
ON
Alarm Input
Alarm Output
MD Dwell Time
ON 30 SEC
User's Manual
Advertisement
Table of Contents
