Page 2
overview CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
Page 3
Continued use in such a condition may cause fire or electric shock. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.) When cleaning, do not spray water directly onto parts of the product.
overview ImPORTANT SAFETy INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
CONTENTS OvERvIEW Important Safety Instructions Contents Features What’s Included At a Glance INSTALLATION & Optional Accessories for CONNECTION Installation Precautions Preparation Installation Initial Setup Connecting With Other Device SETUP How to use the Keyboard Controller Main Menu Profile Camera Set Intelligent Video Privacy Zone Preset...
overview FEATURES With the state-of-the-art digital signal processing technology, full digital image processing and special algorithm of 600-line high resolution implemented High performance surveillance camera, equipped with x43 zoom lens and digital zoom IC, enabling monitoring up to 688 times DAY/NIGHT to improve the sensitivity by automatic conversion into the black and ...
AT A GLANCE CAmERA HOOK HOOK LENS FRAmE SET RS-485 ALARM IN POWER INPUT ALARM OUT Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied ethanol. English _...
installation & connection OPTIONAL ACCESSORIES FOR INSTALLATION For your easier installation, you can purchase appropriate optional accessories available. WALL MOUNT ADAPTOR (SCX-300WM) This is a wall mount adaptor, used for wall- mounted installation of SMART DOME CAMEA units. CEILING MOUNT ADAPTOR (SCX-300CM) This is a ceiling mount adaptor, used for installation of SMART DOME CAMEA units on a concrete ceiling.
Page 9
CORNER MOUNT ADAPTOR (SCX-300KM) This is an adaptor for WALL MOUNT ADAPTOR (SCX-300WM) installation on the corner of wall joint. PARAPET (LONG) MOUNT (SCX-300LM) This is a mounting kit used for installation of SMART DOME CAMEA units on a parapet. English _...
installation & connection PRECAUTIONS Select an installation spot which can endure more than 4 times of the product weight. When installing, prevent peoples approaching to avoid personal injury. Move valuables to a safer place before installing. PREPARATION Run all the external cables through the bracket adaptor’s PIPE or mOUNT hole. Wrap around the HOUSING’s screw hole with the Teflon Tape.
Page 11
INSTALLATION Press the SNAP FIT of the ADAPTOR in the HOUSING to open the ADAPTOR part, and then insert all external cables into the HOUSING. Secure the HOUSING on the PIPE or mOUNT by turning it clockwise. (Secure two components tightly, to avoid loosened HOUSING.) PIPE OR PIPE OR MOUNT...
Page 12
installation & connection Note that BUSHINGs are provided for outdoor installations where exposed to a moisture condition through the PIPE or mOUNT, install the HOUSING using the BUSHING to prevent moisture entering. - Apply grease of proper dose on the BUSHING before assembling, and run cables through each hole of the bushings.
Page 13
Tie up the SAFETy WIRE of the CAmERA on the BRACKET WIRE of the FRAmE SET. Arrange the 22P CONNECTOR of the CAmERA in line with that of the ADAPTOR, push the HOOKs on either end of the CAmERA in the RACK direction of the FRAmE SET to secure the two.
SW604 (x100) (x10) (x1) Communication Protocol Setup Use pins #1~#4 of SW603 to specify the communication protocol. A : SAMSUNG HALF PIN1 PIN2 PIN3 PIN4 PIN7 Comp B : SAMSUNG FULL <Bottom of the camera holder> 1_ installation & connection...
Baud Rate Setup Use pins #5, #6 of SW603 to set the baud rate. BAUD RATE PIN 5 PIN 6 4800 BPS 9600 BPS 19200 BPS 38400 BPS The factory default is 9600 BPS. Setting RS-422A/RS-485 Termination As it is shown in the structure map, when Controller and RS-422A/RS-485 is connected, it should be terminated according to the Cable feature of impedance on the each end of the transmitting line to transfer the signals in long distance by controlling the reflection of the signals to the lowest.
Page 16
installation & connection n < 32 Termination SW1-ON Controller SW2-ON Termination CAM 1 CAM 2 CAM n-1 CAM n <RS-422A/RS-485 Full Duplex Organization> A communication error may occur if you connect multiple cameras that are assigned the same address in the network. 1_ installation &...
CONNECTING WITH OTHER DEvICE MONITOR CONTROLLER/DVR ALARM IN POWER SOURCE ALARM OUT Connecting to a monitor Connect one end of the BNC video cable connector to the Video Output Terminal (VIDEO OUT). Connect the other end of the Video terminal on the connector to the Video Input rear of monitor Terminal of the monitor.
Page 18
installation & connection To connect ALARm IN Connect one end of the external device's signal line to a corresponding ALARM IN port of the monitor. Connect the other end of the signal line to the earth-grounding [GND] port. To connect ALARm OUT Connect one end of the external device's signal line to a corresponding ALARM OUT port of the monitor.
Connecting the adaptor cable Adaptor Board Power Supply Connect the cables as necessary, and turn on the camera to check if it works properly. Connect the adaptor to the power terminal of the camera. Plug the power cord of the adaptor into the wall outlet. English _1...
setup Connect the camera to the keyboard controller or DVR, with which you can manipulate and change the settings of the camera. HOW TO USE THE KEyBOARD CONTROLLER Follow the steps below to set the camera menu using the controller. Open the Camera Setup screen.
mAIN mENU This is the first screen you ever see when you turn on the camera where you can set the camera environment to your needs. For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20) PROFILE ...
setup PROFILE You can select one from the pre-determined configurations as appropriate to your specific camera installation environment. Your selection on each item in PROFILE will affect all other settings of the camera. STANDARD PROFILE Automatically optimizes the camera settings to the normal environment.
Page 23
CAmERA SETUP mENU STANDARD BACKLIGHT DAy/NIGHT GAmING Parent menu Sub-menus MEDIUM MEDIUM MEDIUM MEDIUM MEDIUM AUTO AUTO AUTO NIGHT BURST DAy/NIGHT BURST DAY/NIGHT DAY/NIGHT mODE ATW2 ATW1 ATW1 ATW1 ATW1 BLUE WHITE BAL NIGHT BRIGHTNESS Custom Setting MEDIUM Custom Setting MEDIUM Custom Setting mODE...
setup CAmERA SET You can configure the general settings of the camera module. For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20) Select <mAIN mENU> - <CAmERA SET>. The Camera Setup menu appears. CAMERA SET ...
Page 25
IRIS The IRIS menu is useful if you set to adjust the intensity of radiation incoming to the camera. [ 00 ] ----I---- LEVEL ALC : Adjust the open and close of the iris. BACKLIGHT - LEVEL : Select an overall brightness level. AREA USER <SIZE>...
Page 26
setup As long as the DAY/NIGHT menu is set to AUTO in Camera Setup, the AGC menu is not available. As long as FLICKERLESS is set to ON, the AGC mode is not available. mOTION You can specify a level of AGC for controlling the camera motion. This is available only of the SENSE UP menu is set to AUTO.
Page 27
FLICKERLESS This will prevent possible screen distortion due to a mismatch between the vertical sync frequency and the blinking frequency of the lighting; if set to <ON>, the shutter speed will be fixed to 1/120 second. If SHUTTER is set to FIX, SENSE UP to FIX, and AGC to FIX, the <FLICKERLESS> menu is not available.
Page 28
setup NIGHT DAY DWELL TIME : Time required to determine the filter switch. MASK AREA : If there exists a bright MASK AREA spot light source in a night scene, you can specify the size and position as <SIZE> needed.
WHITE BAL If you need to adjust the color according to the ambient illumination, you can use the <WHITE BAL> function. For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20) Illumination is generally referred to as color temperature, which is represented in a measurement of kelvin (K).
Page 30
setup Select <CAmERA SET> - <WHITE BAL>. Select a mode where you set the <WHITE BAL>. DAY : You can set the RED, and BLUE value in DAY mode. WHITE BAL The screen will be displayed in colors DAY/NIGHT according to your settings.
FOCUS mODE You can select a focus mode according to the angle that you adjusted for camera recording. DAY/NIGHT AUTO - AF : This will monitor the screen continuously WHITE BAL to focus automatically. If you adjust the focus FOCUS MODE ZOOM SPEED manually, that will operate the same as in DISPLAY ZOOM...
setup DIGITAL ZOOm You can set the maximum allowable digital zoom ratio. Digital Zoom will start operation after it is zoomed in to the maximum optical ratio of x43. If you set DIGITAL ZOOM to x16, you can take a shot at up to x688 (43x16). DETAIL Used to adjust the vertical and horizontal distinction, respectively.
DIS (Digital Image Stabilization) If you set it to <ON> for a camera that is trembled or vibrated from an ambient change, this will automatically compensate for the flicker on the screen. If you set <DIS> to <ON>, the image will be enlarged with digital zoom as much area as compensated.(Approximately 1.2 times of the optical zoom factor) If you set the digital zoom to a larger ratio than the actual enlargement for compensation, the <DIS>...
setup mASK AREA MASK AREA <SIZE> Select the number of the area to be <LOCATION> masked that will be excluded from motion detection. Select the mask number and set the mask size and its coverage. DISPLAy When selected <ON>, it displays the motion detected and detection of configured advanced function.
Select the number of the zone and press PRIVACY ZONE SET 1 [ENTER]. The Zone setup screen appears. <SET P/T/Z> PIXEL LEVEL [ 4 ] Select the <SET P/T/Z> and press <POINT> [ENTER]. Using the joystick, adjust the camera’s pan, tilt and zoom. Select <POINT>...
Page 36
setup Select the preset number. PRESET 1/16 Select <POSITION> and adjust <PAN/ PRESET NO. 1 TILT/ZOOm> to the desired setup using the joystick. POSITION PRESET ID Set <PRESET ID> to <ON> and enter the PRESET SPEED [ 5 ] name.
AUTO SET You can set the AUTO PAN, PATTERN, and AUTO PLAY. If you upload/download the menu setting using SSC-1000, 2000 or 5000, the settings for AUTO PAN, PATTERN, SCAN, and PRESET may differ from the menu settings so define them again after the operation. Auto Pan Setup Set the starting and ending positions to patrol between points at specified speed.
setup DIRECTION : Sets the direction of the camera’s movement from the starting to the end position. (Based on panning) <RIGHT> <LEFT> START START ENDLESS : Instead of shuttling between start and end positions, the camera turns 360° endlessly while stops for the <DWELL TImE> at both positions. SPEED : Sets the moving speed of the camera, from 1 to 64.
Scan Setup You can set the SCAN operation to include a defined preset position. For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20) Select <mAIN mENU>-<AUTO SET>. SCAN 1 Select the scan number. ...
setup AUTO PLAY2 : Select the auto play AUTO PLAY 2 action and set its starting / ending time. ID: START PLAY When the time hits the defined starting 00:00 03:00 time, configured auto play will begin. 2 03:00 06:00 3 06:00 09:00...
When the <ZONE AREA mAP> screen ZONE AREA MAP appears, select a number. When the <ZONE AREA SET> screen appears, set the <POSITION> and <ZONE ID SET>. For entering the name, refer to “CAMERA ID”. (page 24) POSITION : Sets the left/right boundaries ...
Page 42
setup ALARM PRIORITY : Sets the priorities of ALARM PRIORITY SET alarms. Setting the priorities of 8 alarms defines the alarm notification priorities ALARM1 of them in the highest orders. ALARM2 By default, the priorities are set as ALARM3 ALARM4 Alarm 1 ...
CLOCK SET Sets whether to display the clock on the screen and its time format. For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20) Select <mAIN mENU>-<CLOCK SET>. CLOCK SET Select <DISPLAy>...
setup FACTORy DEFAULTS When selected, the <FACTORy DEFAULTS> screen appears and you can reset all settings FACTORY DEFAULTS to the factory default settings by selecting the <OK>. However, the protocol, baud rate, address and the language settings will not be CANCEL reset.
Select each item and set appropriately. RS485 PRIORITY : Set the priority by selecting PRIORITY <HW> or <SW>. PROTOCOL SAMSUNG-E HALF When selected <HW>, the protocol, BAUD RATE 9600 baud rate and address settings will ADDRESS follow those settings of the adaptor switch.
SpEcificationS item Description product type SMART DOME CAMERA AC 24 V (50 Hz) power Source Use an adaptor over 3A when the heater works. power consumption 16.3W(Camera, Fan) / 47W(Heater ON) NTSC/PAL STANDARD COLOR SYSTEM tV Standard image Sensor Super-HAD IT CCD PAL: 752(H) ×...
Page 48
appendix item Description PAN range : 360˚Endless Preset Pan Speed : 600˚/sec, maximum Manual Pan Speed : 0.01˚~ 180˚/sec Tilt range : -6˚~186˚ tiLt Preset Tilt Speed : 600˚/sec, maximum Manual Tilt Speed : 0.01˚~ 180˚/sec RS485(Half&Full Duplex)/RS422, remote control Data on Coaxial Cable Alarm Inputs : 8 IN Alarm...
proDuct AppeArAnce Ø216mm (Housing Body) Ø228mm (Shield Sun) English _49...
Page 50
TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Park Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 Chertsey, Surrey, UNITED KINGDOM KT16 OPS www.samsungcctvusa.com TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungtechwin.com...