Alarm Setting - Samsung Techwin SCP-2270H User Manual

setup

ALARM SETTING

Alarm Enable
ON/OFF :
Enables or disables the Alarm function.
Alarm Input
MOD
Enables selecting an Alarm Input method.
- NO (Normally Open)
IN 1.2.3.....8
ALM GND
ALARM OFF
< Alarm input when N.O. is enabled >
- NC (Normally Closed)
IN 1.2.3.....8
ALM GND
ALARM OFF
< Alarm input when N.C. is enabled >
M

As shown in the picture above, the Alarm Input must be entered with the Open or Closed switch signals. Supplying power
without entering the signals may damage the product.
setup
80_
IN 1.2.3.....8
ALM GND
ALARM ON
IN 1.2.3.....8
ALM GND
ALARM ON
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Alarm Setting
Alarm Enable
Alarm Input
Alarm Output
MD Dwell Time
ALM MOD P SEQ. NO
IN1 OFF 1 OFF
IN2 OFF 2 OFF
IN3 OFF 3 OFF
.....
OFF
OFF