Transfer Roller - Samsung SCX-4100 Service Manual

Disassembly and Reassembly

5.14 Transfer Roller

1. Before you remove the Transfer Roller you should
remove:
- Rear Cover (see page 5-2)
- Side Covers (see page 5-3)
- Scanner Ass'y (see page 5-4)
- Middle Cover (see page 5-6)
- LSU(see page 5-9)
2. Remove 3 screws and take the Transfer Earth out.
Transfer
Earth
3. Unplug the PTL Holder Connector then remove the
PTL Holder and PTL Lens as shown below. Take care
to note the orientation of the PTL lens and ensure it is
refitted correctly
PTL
PTL Lens
Holder
Service Manual
5-14
4. Unlatch the Bush and remove it. Then lift the Transfer
Roller out, as shown below.
Transfer
Roller
Bush
Samsung Electronics