Westinghouse WRH605I Operation Manual/Installation Instructions page 3

Retractable
Hide thumbs Also See for WRH605I:
Table of Contents

Advertisement

INSTALLATION INSTRUCTIONS
Please read instructions carefully. Service calls resulting from incorrect installation will be charged for.
Exhaust air from the Rangehood must not be discharged into any heating fl ue which may carry
combustion products from other sources. In addition, exhaust air must not be discharged into a wall
cavity, unless the cavity is designed for the purpose. Adequate ventilation of the room must be
ensured when the Rangehood is operating simultaneously with appliances burning gas or other
fuels. Installation must comply in all respects with your gas and electrical authorities. This
Rangehood is an indoor domestic appliance, and has been manufactured and tested to comply
with Australian and New Zealand Standard AS/NZ3350,2,31
650
600
It is recommended that the unit be positioned as close as possible to 600mm (electric hobs),
650mm (gas hobs), and no further from the hob than 800mm. The unit becomes less effective as
the distance from the cooking surface to the hood increases.
FIXING POINT DIMENSIONS
Retractable cooker hood 600mm
FIXING POINT DIMENSIONS
Retractable cooker hood 900mm
P2
OPERATION GUIDE & INSTALLATION INSTRUCTIONS

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wrh908iRehr6Rre634Wrh608iRre635Rre934

Table of Contents