Location Of Controls - Akai PD-X2210I Operator's Manual

LOCATION OF CONTROLS

CD MODE BUTTON
STOP BUTTON (power off)
DC IN 4.5V
ADAPTOR JACK
HOLD
SWITCH
DOOR OPEN
CONTROL OPERATION AND FUNCTION
POWER SUPPLY
Your CD player requires 2 size "AA" alkaline
batteries (not include), or use the AC adaptor
AC ADAPTOR OPERATION
Plug one end of the AC adaptor into the DC 4.5V jack, then plug the other end into
AC wall outlet.
PRECAUTIONS ON USING THE AC ADAPTOR
Don't touch the AC adaptor with wet hands. Doing so is dangerous, as this could
result in an electric shock.
If the adaptor plug is insert into the DC Jack of the Player, the power supply auto-
matically switch to the AC/DC power and the batteries supply will be disconnected.
DC OPERATION
ALKALINE BATTERY INSTALLATION (NOT SUPPLIED)
Insert two AA batteries (not supplied) into the battery compartment on the bottom of
the unit. Be sure to observe the proper polarity.
BATTERY CAUTIONS
• Use only the size and type of batteries specified.
• Be sure to follow the correct polarity when installing the batteries as indicated in
the battery compartment. Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g. alkaline and carbon-zinc) or
old batteries with fresh ones.
• If the device in not to be used for a long period of time, it is required to remove the
batteries to prevent damage or injury from possible battery leakage.
• Do not try to recharge batteries which is not intended to be recharged; they can
overheat and rupture. (follow battery manufacturer's directions)
• Weak batteries can leak and severely damage the unit.
• Always remove batteries as soon as they become weak.
VOLUME
BASS BOOST
CONTROL
SWITCH
ANTI-SKIP BUTTON
LCD (Liquid Crystal Display)
PHONES JACK
4
PROGRAM BUTTON
CD SKIP (
BUTTON
PLAY/PAUSE
(power on)
BATTERY DOOR
LINE OUT JACK
RECHARGE SWITCH
)