Subscribe to Our Youtube Channel
Related Manuals for Akai PD-X2210I
Summary of Contents for Akai PD-X2210I
- Page 1 Operator’s manual PORTABLE CD PLAYER WITH ANTI-SHOCK (10 SEC.) PD-X2210 I (GB) Operator’s manual (NL) 10-18 Gebruikshandleiding 19-29 Mode d’emploi...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the prod- uct’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. - Page 3 12. POWER-CORD PROTECTION - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular atten- tion to cords at plugs, convenience receptacles, and the point where exit from the product. 13.
-
Page 4: Precautions For Unit
PRECAUTIONS FOR UNIT SECURITY • Before operation, check if the voltage of the unit is in line with the local voltage. • Hold the plug to disconnect it from the mains outlet. Do not pull the power cord. • When the plug of the unit is connected to the mains outlet, the unit will be still connected to AC even of the power is turned off. -
Page 5: Location Of Controls
LOCATION OF CONTROLS CD MODE BUTTON ANTI-SKIP BUTTON STOP BUTTON (power off) LCD (Liquid Crystal Display) DC IN 4.5V ADAPTOR JACK PROGRAM BUTTON HOLD CD SKIP ( SWITCH BUTTON PLAY/PAUSE (power on) BATTERY DOOR LINE OUT JACK PHONES JACK DOOR OPEN VOLUME BASS BOOST CONTROL... - Page 6 • If the display shows the symbol “ ”, this means your batteries are weak, re- place them or use the AC adaptor. • If the display is blank - no numbers show when power is turned on, the batteries are dead.
- Page 7 PLAYING A DISC Be sure to reduce the volume before plugging in or unplugging the headphones/ earphones 1. Plug the cord from a pair of headphone/earphone into the PHONES jack. 2. Slide the Door Open button to open the CD door. 3.
- Page 8 Note: Programmed play will begins automatically if you program 20 tracks. “PROG” shows steady in the display and programmed play begins. 6. The player stops automatically after all programmed tracks have been played. To play the same program again, press the PLAY/PAUSE Button. The programming will be cleared if 1.
-
Page 9: Technical Specifications
NOTE: The volume control or the player become inoperable when the line out jack is used. Adjustments are made on your audio system. TECHNICAL SPECIFICATIONS MODEL NO. PD-X2210I Audio D/A conversion 1-bit DAC four times oversampling Frequency response 20-20,000Hz... -
Page 10: Troubleshooting Guide
Wait a few seconds and re-insert. Electronic or static error Buttons do not work Make sure batteries are fresh or adaptor has caused circuitry to lock. power. The HOLD function is on. Slide the HOLD switch to OFF position. Importer AKAI Benelux Information: www.akai.nl...
Need help?
Do you have a question about the PD-X2210I and is the answer not in the manual?
Questions and answers