Wifi Configuration - ZMODO IP Camera User Manual

®

2.3 WiFi Configuration

Double click on the IP Camera that you just saved networking settings on, and click
on the "Wifi" tab. Select the check box to enable Wi-Fi.
Next, manually set the IP Addr field, Subnet Mask field, and Gateway field to
match the settings that appear in the Networking tab of the IPC Config menu. Click
[Submit] then click [Refresh]. A list of available Wifi networks will appear in the list.
Double click the name of the Wifi network to enter the WIFI Wireless Network
Settings menu. From this menu, enter your Wifi password and click "Establish
Connection."
Click "Refresh" on the WIFI Wireless Network Settings menu, your camera should
now show Connection Status: Connected. You may need to click "Refresh" more
than once before the Connection Status reads: Connected.
You have successfully connected one camera to your wireless router using Wifi! You
may now disconnect the Ethernet from the camera, and your IP Camera should
continue to appear in the IPCSearch program.
7