Network Configuration - ZMODO IP Camera User Manual

®

2.2 Network Configuration

In order to login and view your camera from Internet Explorer, you will need to
first find out the IP Address Segment, Default Gateway, and Subnet Mask of
your computer.
To find out the IP Address Segment, Default Gateway, and Subnet Mask, you
will need to open the command prompt from a Windows PC that is connected to
the same router that your IP Camera(s) will be connected to.
To open a Command Prompt, press the Windows Key and R at the same time on
your keyboard. Type "cmd" in the run line and press "Enter."
In the new window that appears, type "ipconfig" then press "Enter." Make note of
your IPv4 Address, Subnet Mask, and Default Gateway. You will need this
information later.
Open the program called IPCSearch that you downloaded previously.
Click the [Refresh] button on the upper right side of the IPCSearch program. Your
IP Camera should appear in the list of items if your IP Camera is successfully
connected to the same router as your PC is connected to.
Double-Click on your IP Camera in the IPC Search program, and you will have
the option to change some of the network settings:
5