Installation Statement; Network Ip Camera Connection - ZMODO IP Camera User Manual

1.3 Installation Statement

During installation and operation, please pay attention to the following items:
1. When you received the package product, please check the equipment
and accessories according to the packing list inside the shipping box.
2. Before installing the system, please carefully read this manual.
3. When you install the IP Camera, please make sure that it is not
plugged into a power source.
4. Check the voltage of the power source to prevent damaging the
device. The correct voltage is 12V DC and 1.5A.
Installation environment: Please do not use the cameras in an
environment that has high humidity, high temperature, or extreme changes in
temperature. Make sure the camera is installed in a location with good
ventilation. Do not install the camera in an area that is subject to violent
vibrations.

1.4 Network IP Camera Connection

1: Connect the IP Camera to an open port in your router using a network LAN
cable.
2: Connect the included power adapter to the IP Camera so that the
camera powers on.
3: Go to www.zmodo.com/nvrdisc
Figure 1-3 Device Connection of Network IP Camera
and download the program called IPCSearch.
®
3