Table of Contents
Advertisement
Bluetooth
09
Cellphone Pairing Mode
1. Browse your cellphone menu and find
the connectivity or Bluetooth connection
section.
2. Select search for a new handsfree device
function and allow the phone to find the
mobile.
(Different cellphone has different blue-
tooth menu, please refer to your phone
manul.)
3. When CAR A/V DEVICE appear, select
this item.
( if it can not be connected, please refer
to mobile manual, and connect it again.)
4. To input the password, the password is:
1234.
5. Press the connect with the Handsfree
option on your cellphone, and CON-
NECTED appears.
Bluetooth Connection and
Disconnection
When established bluetooth connection
between this unit and the cellphone, bluetooth
icon
on the display appears in red.
Press
29
PAIR to turn off bluetooth con-
nection, and
appears in blue.
Press
29
, PAIRING SUCCESS appear on
the display, then display shows CONNECTED
when bluetooth connected; display shows
PAIR TIME OUT, when bluetooth
disconnected.
Note:
* Please keep the phone battery is full of power,
or else the bluetooth connection will be disturbed.
* To ensure connection succeed
----Please delete menu of cellphone with blue-
tooth.
----Please reset the unit and cellphone.
----Please reset every step of pairing.
* Disconnect after paring
----Please pair the phone in manual.
For example: pairing fixture
cellphone
44
* Pressing
PAIR
on the head unit or
monitor also performs the same function.
* Pressing
in the monitor to turn off the
7
bluetooth function.
Using the Unit as a Handsfree
Device
When the unit is ringing, then it appears
call from and the phone number ID******
*****on the dialing,
To accept call: Press
to answer a call,
30
it appears PICK UP on the display.
To reject call: Press
31
to reject a call,
it appears REJECT on the display.
To end call: Press
to end call, and
HANG UP appears on the display.
Note:
* Some of cellphones do not support reject
call during bluetooth mode.
* Press
and
on the unit or
performs the same function.
Last Number Dialing
Press
30
button, it appears last call
number on
, press
again, and then
4
PICK UP appears on the display during
conversation.
Note:
* Press
on the unit or
perform the
same function.
* To dail the number of the unit in the car
only.
To Dial by Cellphone
1. The unit activated automatically when you
make a call by cellphone, and DIAL OK
appears.
2. When you receive a call, PICK UP appears
on the display.
connect.
Before You Start
Location of the Controls
in the
5
The Expanding
and
The Whole
ANGLE
OPEN
SEL
EQ/AF
MODE
MUTE
BAND
LOU/TA
1
2
PWR
MIC
18
ANGLE
13
OPEN
SEL
EQ/AF
4
MODE
MUTE
14
BAND
1
2
LOU/TA
PWR
MIC
2
17
9
3
7
01
ANGLE
REL
A/V IN
RPT
RDM
3
4
5
6
12
11
ANGLE
10
REL
A/V IN
RPT
RDM
3
4
5
6
5
8
1
6
7
Advertisement
Table of Contents
