Specifications - Planet Audio PI9758B User Manual

Tuner
07
MO/ST Selector
During radio status, you can press 6
button on the remote control to select
mode or mode.
STEREO
Stereo reception is charged when
STEREO
appears.
It is switched to mode when
MONO
appears.
Note:
It is only valid on remote control.
*
Switch to MONO compulsively to improve
*
the listening quality when week signal.
It is only valid in FM tuning.
*
Scanning/Memorizing Stations
Automatically
During radio status, briefly press AMS
4
button on the remote control to scan each
stored station 6 seconds respectively wh-
ich stored in Number Buttons (from 1
23
to 6) . You can press the cor responding N-
umber Buttons or AMS but ton when your
desired station is charged. And it starts pl-
aying that station.
4
When press and hold AMS button it
will activate automatically memory storing
function. The radio automatically selects
station and has it stored in any one of
23 Number Buttons (from1 to 6).
Note:
* The unit can be stored up to 6 stations for
each band.
* It is only valid on remote control.
40
On Screen Display
During radio status, press 8 OSD to display
ST
the edition information.
MONO
Goto FREQ
MONO
Press 2 GOTO, and the monitor shows:
FREQ, then press the Number to input the
valid frequency, then the TV program will
be played.
Note:
* It is only valid on remote control.
* It is only valid when GOTO FREQ is on in
main menu.
Number Buttons
During radio status, press Number Buttons
to receive the stored stations.
During radio status, Number Buttons
(from 1 to 6) can help you
23
ur favorite station. You can follow the
as below:
1
When receiving a station,press and hold
any one of the Number Buttons
,
(from 1 to 6) until the number app-
ears on the LCD, which indicates that
a
station is already stored in the corresp-
the
onding number button.
2
Press and hold 4 AMS button to receive
stations automatically, and store them in
1 to 6 number respectively.
3 Press and hold another number button
more than 2 seconds when listening in
a station in one number button s, the
station will be stored in that number
button.
Note:
Press in the monitor performs the same
* 5
function.
Before You Start

Specifications

General
Power Requirement
Load Impedance
Max.Power Output
Tone Controls
Dimensions
Weight
FM Section
store yo-
Tuning Range
steps
(Optional)
IF Range
Usable Sensitivity
(-30dB)
Signal-to-noise Ratio
Stereo Separation
Frequency Response
AM Tuner Section
Frequency Range
14.4V DC
(11-16V allowable)
(Optional)
IF Range
85W x 4
Usable Sensitivity
7dB
(-20dB)
Bass 100Hz
Treble 10KHz
VCD/CD Player Section
Approx.197x178 x 50
VCD Signal System
mm (d/w/h)
Signal-to-noise Ratio
Approx.2.7kg
Separation
Distortion
DVD Player Section
87.5-108(MHz)
DVD Signal System
(Europe)
Channels
87.5-107.9(MHz)
(U.S.A.)
Frequency Response
10.7MHz
Signal-to-noise Ratio
10dBuV Separation
50dB
Note:
Due to continuous product improve-
30dB 1KHz
ment, specifications and design are
subject to change without prior notice.
40 Hz -12KHz
01
522-1620(KHz)
(Europe)
530-1710 (KHz)
(U.S.A.)
450KHz
32dBuV
AUTO/PAL/NTSC
60dB
55dB(1KHz)
0.3%
AUTO/PAL/NTSC
2
40Hz to 16KHz
60dB
60dB
11