Custom - Wireless - Panasonic TH-L42ET60Z E-Manual

3. Select Quick setup
4. Automatically setup is done and the
Home network
5. Select Exit with
To set manually
●
Home network

Custom - Wireless

Ensure the connections are completed before starting network setup.
Home network
1. Display the menu with
2. Select Network
/ and press
Confirm the encryption key, settings and position of your access point
●
before starting setup. For details, read the manual of the access point.
3. Select your desired access point with
Available Wireless Networks are displayed automatically.
●
: Encrypted access point
For WPS(Push button)
●
1) Press
2) Press the WPS button on the access point until the light flashes
3) Connect the TV with the access point with
– WPS: Wi-Fi Protected Setup™
– If the connection has failed, check the settings and positions of your
access point. And then, follow the on-screen instructions.
For WPS(PIN)
●
1) Press
2) Enter the PIN code to the access point
3) Connect the TV with the access point with
For Manual
●
1) Press
2) You can set up SSID, security type, encryption type, and encryption
key manually
3) Follow the on-screen instructions and set manually
– When you use 11n (5 GHz) for the wireless system between the
built-in wireless LAN and access point, select
with / and press
Network Status
Network settings
/ and press OK
Network settings
Network connections
MENU
Network Connection
OK to access
(red)
(green)
(yellow)
- 68 -
OK to access
screen is displayed
Network Status
to set
Custom - Wired
Custom Wireless
/ and press OK
OK
OK
AES for the encryption
with / /
to access