Manual Tuning; Update Channel List; Signal Condition - Panasonic TH-L42ET60Z E-Manual

Manual Tuning

■
Digital TV
Normally use Auto Tuning
channels.
If tuning has not been done completely or for adjusting the direction of the
aerial, use this function.
All Digital channels found will be added to
●
1. Select physical channel with
2. Press OK to search
■
Analogue TV
Set Analogue TV channel manually after
1. Select the channel position with numeric buttons
2. Select the channel with Channel Up / Down button
3. Search with /
4. Select Store with
If a VCR is connected only with the RF cable, select channel position 0.
●

Update Channel List

By updating the Digital TV channel list, you can add new channels, delete
removed channels or change channel names and positions automatically.
The channel list is updated while keeping your settings in
●
Channel List, Child
Depending on the signal condition, the update may not work properly.
●

Signal Condition

Selects a channel and checks the signal condition.
A good Signal Strength is not an indication of suitable signal for Digital TV
reception.
Use the Signal Quality indicator as follows.
●
– Green bar: Good
or Update Channel List
/ and select offset with
Auto
/ and press OK to set
Lock, etc.
- 44 -
to retune Digital TV
Channel List.
/
Tuning.
Favourites Edit,