Network Settings; Network Connection - Panasonic TH-L42ET60Z E-Manual

If you use the equipment compatible only with 100BASE-TX, category 5 or
●
later LAN cables are required.
Contact your Internet Service Provider (ISP) or telecommunications
●
company for further assistance regarding the network equipment.
Confirm the terms and conditions of the contracts with your Internet
●
Service Provider (ISP) or telecommunications company. Depending on the
contracts, additional fees may be charged or multiple connections to the
internet may be impossible.
Turn the TV off, and then on again when changing or making the network
●
connection again.

Network settings

Network Connection

Ensure the connections are completed before starting network setup.
Internet service
■
Quick setup - Wireless
1. Display the menu with
2. Select Network
Confirm the encryption key, settings and position of your access point
●
before starting setup. For details, read the manual of the access point.
3. Select Quick setup
When the LAN cable is connected, wired setup will be done
●
automatically.
4. Select your desired access point with
Available Wireless Networks are displayed automatically.
●
: Encrypted access point
For WPS(Push button)
●
1) Select Easy setup with Push button
access
2) Press the WPS button on the access point until the light flashes
3) Connect the TV with the access point with
– WPS: Wi-Fi Protected Setup™
– If the connection has failed, check the settings and positions of your
access point. And then, follow the on-screen instructions.
It is recommended to select the encrypted access point.
●
5. Enter the encryption key of the access point with
Network connections
MENU
Network Connection
with / and press
- 55 -
with / and press
OK to access
/ and press OK
with / and press
OK
/ /
OK to access
to access
OK to
/ and press