3D Mode Selection - Panasonic TH-L42ET60Z E-Manual

■
2D images converted to 3D
Set to 2D 3D mode in
●
Watching

3D Mode Selection

You can easily change the viewing mode between 2D and 3D with 3D.
1. Display the 3D Mode Selection
2. Select the mode with
Items of 3D Mode Selection
●
3D / 2D:
Displays the appropriate image as you desire without selecting 3D format.
This mode may not work properly depending on the source image
●
format. In this case, select the appropriate 3D format manually.
■
To change 3D format manually
When the image is not changed properly using
manual setting.
1. Display the 3D Mode Selection (Manual)
above operation
2. Select the mode with
Original:
Displays the source image as it is.
Use to identify the format type of the source image.
●
Watching
Side by Side - 3D / Side by Side - 2D
- 2D:
Displays the mode you select.
Not valid in Analogue TV and AV mode
●
2D 3D:
Converts 2D images into 3D.
Please note the 3D images appear slightly different from the originals.
●
Using this function for profit-making purposes, or publically showing
●
images converted from 2D to 3D in places such as shops or hotels
etc. may infringe on the rights of the copyright holder protected under
copyright law.
3D Mode Selection.
3D 3D Mode Selection
screen with
/ and press
vary depending on the condition.
/ and press
3D Source image format
/ Top and Bottom - 3D
- 37 -
3D
OK to set
3D / 2D mode, use this
screen with (red) during
OK to set
/ Top and Bottom