Ambient Sensor; Auto Power Standby Function; Aspect - Panasonic TH-L42ET60Z E-Manual

Reproduces the original image quality precisely without any revision.
Custom:
Adjusts each menu item manually to suit your favourite picture quality.
In each Viewing Mode, Backlight, Contrast, Brightness, Colour, Tint,
Sharpness, Colour Temperature,
Ambient Sensor, Noise
Creation and 24p Smooth Film
When in True Cinema
additionally. The settings in
each input.
You can set Viewing Mode
●

Ambient Sensor

1. Display the menu with
2. Select Picture
3. Select On / Off with
Ambient Sensor
(On / Off)
Automatic Brightness Control function
●
Adjusts picture settings automatically depending on ambient lighting
conditions.

Auto power standby function

The TV will automatically go into Standby mode in the following conditions:
Off Timer is active.
●
Watching
No operation is performed for 4 hours while
●
Settings
No signal is received and no operation is performed for 10 minutes while
●
No signal Power off
Settings
= Note =
This function does not affect the recording of
●

Aspect

Change the aspect ratio (image size) with ASPECT.
Vivid Colour,
Reduction, MPEG Noise
can be adjusted and stored.
or Custom mode,
True Cinema
in 2D and 3D mode for each.
MENU
Ambient Sensor with
/ and press
Basic Off Timer
Timer Auto Standby
is set to On.
Timer No signal Power off
- 26 -
Adaptive Backlight
Reduction, Intelligent Frame
Advanced Settings can be adjusted
or Custom mode can be stored for
/ and press OK
OK to set
Auto Standby
One Touch Recording.
Control,
to access
is set to On.