Configuration Tool - LevelOne WAP-0006 User Manual

3.2.7 Configuration Tool

The Configuration Tools screen allows user to save (Backup) the Access Point's current
configuration setting. Saving the configuration settings provides an added protection and
convenience should problems occur with the Access Point and user have to reset to
factory default. When user save the configuration setting (Backup) user can re-load the
saved configuration into the Access Point through the Restore selection. If extreme
problems occur user can use the Restore to Factory Default selection, this will set all
configurations to its original default settings (e.g. when user first purchased the Access
Point).
Parameter
Configuration Tools
Description
Use the "Backup" tool to save the Access Point's current configuration to
a file named "config.bin" on user's PC. User can then use the "Restore"
tool to upload and restore the saved configuration to the Access Point.
Alternatively, user can use the "Restore to Factory Default" tool to force
the Access Point to perform a power reset and restore the original factory
settings.
40
Wireless LAN Access Point Configuration