Assembly - Husqvarna COLLECTION KIT Operator And Parts Manual

UNPACKING INSTRUCTIONS
• Remove all parts and packing materials from
carton.
• Check carton contents against list. Be sure all
parts are there.
TOOLS REQUIRED
•
½" Wrenches (2)
•
/ " Socket
5
16
•
Drill
•
/ " Socket
9
16
•
Phillips Screwdriver
PARTS IDENTIFICATION
COVER

ASSEMBLY

BAG
CONTAINERS
NOTE: When right hand (RT) and left hand (LT) are men-
tioned in this manual, it means when you are seated on
the mower in the operator's position.
CAUTION
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:
• Set parking brake.
• Place motion control levers in "NEUTRAL" position.
• Turn ignition key "OFF" and remove key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect spark plug and place wire where it cannot come in contact with
plug.
6
ASSEMBLY
•
/ " Wrenches (2)
9
16
•
Ft/Lbs Torque Wrench
•
/ " Drill Bit
5
16
•
Ratchet
CONTAINER CONTENTS
2 - Soft bag containers
1 - Upper Chute
1 - Cover Assembly
UPPER
CHUTE
1 - Bag of Hardware
1 - Lower Chute
1 - Mounting Hardware
LOWER
CHUTE