Activating/Deactivating Sms Function; Sms Troubleshooting - Siemens Gigaset SL785 Instructions Manual

Activating/deactivating
SMS function
If you deactivate the SMS function, you
cannot send or receive any SMS messages
with your phone.
The settings you have made for sending
and receiving SMS messages (e.g. the
numbers of the SMS centres) and the
entries in the incoming and draft message
lists are saved even after deactivation.
v
Open the main menu.
*#Q5# 2 L
Enter the digits.
Q
Deactivate SMS function.
§OK§
Or:
Activate SMS function (default
§OK§
setting).

SMS troubleshooting

Error codes when sending
E0 Calling Line Identification permanently
withheld (CLIR) or Calling Line Identifica-
tion not activated.
FE Error occurred during SMS transfer.
FD Connection to SMS centre failed; see self-
help.
Self-help with errors
The following table lists error situations
and possible causes and provides notes on
troubleshooting.
You cannot send messages.
1. You have not requested the CLIP service
(Calling Line Identification Presentation).
¥
Ask your service provider to enable this
service.
2. SMS transmission has been interrupted
(e.g. by a call).
¥
Re-send the SMS.
3. The network provider does not support this
feature.
4. No number or an invalid number is entered
for the SMS centre set as the active send
service centre.
¥
Enter the number (
You receive an incomplete SMS.
1. Your phone's memory is full.
¥
Delete old SMS messages (
2. The service provider has not yet sent the
rest of the SMS.
You have stopped receiving SMS messages.
1. You have changed the ID of your mailbox.
¥
Give your SMS contacts your new ID or
undo the change (
2. You have not activated your mailbox.
¥
Activate your mailbox (
3. Call divert (redirecting) is activated with
When: All Calls or for the network mailbox by
selecting All Calls.
¥
Change the call divert (
SMS (text messages)
¢
page 46).
¢
page 42).
¢
page 45).
¢
page 45).
¢
page 32).
47