Changing The Name Of A Handset; Changing A Handset's Internal Number; Using A Handset As A Room Monitor - Siemens Gigaset SL785 Instructions Manual

Internal listening in
The line is engaged with an external call.
Your screen will display information to
that effect. You want to listen in to the
external call.
c
Press and hold the talk key.
You can listen in to the call. All participants
hear a signal tone. During this time, this
handset displays the
and it is not possible to dial another
number from this handset.
Ending listening in
a
Press the end call key.
All participants hear a signal tone.
If the first internal participant presses the
end call key a, the handset that has
"listened in" remains connected to the
external participant.

Changing the name of a handset

The names "INT 1", "INT 2" etc. are
assigned automatically at registration.
You can change these names. The name
must be no more than 10 characters. The
changed name is displayed in every hand-
set's list.
u
Open the list of handsets. Your
own handset is indicated by
s
Select handset.
Open menu.
§Options§
Rename
~
Enter name.
Press the display key.
§Save§
message
Conference
f

Using a handset as a room monitor

Changing a handset's internal
number
A handset is automatically assigned the
lowest free number when it is registered.
If all slots are occupied, number 6 is over-
written if this handset is in idle status. You
can change the internal number of all reg-
istered handsets (1–6).
u
Open the list of handsets. Your
own handset is indicated by
Open menu.
§Options§
Assign Handset No.
Select and press
r
Select number. Only numbers
that have not been assigned
are displayed.
Press the display key to save
§Save§
the input.
Using a handset as a
room monitor
If the room monitor is activated, a previ-
ously saved destination number is called
as soon as a set noise level is reached. You
can save an internal or external number in
your handset as the destination number.
.
All of the handset keys are deactivated,
with the exception of the display keys.
The room monitor call to an external
number stops after around 90 seconds.
The room monitor call to an internal
number (handset) stops after approx. 3
minutes (depending on the base). When
the room monitor is activated, all keys are
locked except the end call key. The hand-
set's speaker is muted.
f
.
.
§OK§
61