AirLive WT-2000R User Manual
  1. Manuals
  2. Brands
  3. AirLive Manuals
  4. Wireless Router
  5. WT-2000R
  6. User manual

AirLive WT-2000R User Manual

Turbo-g wireless broadband router
Hide thumbs Also See for WT-2000R:
Table of Contents

Advertisement

Quick Links

WT-2000R
Turbo-G Wireless Broadband Router
User's Manual
1
AirLive WT-200R User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WT-2000R and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AirLive WT-2000R

Summary of Contents for AirLive WT-2000R

  • Page 1 WT-2000R Turbo-G Wireless Broadband Router User’s Manual AirLive WT-200R User’s Manual...

  • Page 2: Fcc Interference Statement

    CE Declaration of Conformity This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022/A1 Class B. The specification is subject to change without notice. AirLive WT-200R User’s Manual...

  • Page 3: Table Of Contents

    Appendix D WDS Setting ................88 Appendix E FAQ and Troubleshooting ..........92 What can I do when I have some trouble at the first time?..92 How do I connect router by using wireless?........ 97 AirLive WT-200R User’s Manual...

  • Page 4: Chapter 1 Introduction

    Lets a networked computer be fully exposed to the Internet; this function is used when special application sensing tunnel feature is insufficient to allow an application to function correctly. Statistics of WAN Supported Enables you to monitor inbound and outbound packets AirLive WT-200R User’s Manual...
  • Page 5 When SPI Mode is enabled, the router will check every incoming packet to detect if this packet is valid. DoS Attack Detection Supported When this feature is enabled, the router will detect and log the DoS attack comes from the Internet. AirLive WT-200R User’s Manual...

  • Page 6: Packing List

    Customers can control some functions, like virtual server and packet filters when to access or when to block. Other functions UPNP (Universal Plug and Play)Supported The router also supports this function. The applications: X-box, Msn Messenger. Packing List Wireless broadband router unit Installation CD-ROM Power adapter CAT-5 UTP Fast Ethernet cable AirLive WT-200R User’s Manual...

  • Page 7: Chapter 2 Hardware Installation

    Figure 2-1 Front Panel LED: Ports: Port Description Power inlet the port where you will connect your cable (or DSL) modem or Ethernet router. Port 1-4 the ports where you will connect networked computers and other devices. AirLive WT-200R User’s Manual...
  • Page 8 Link status Green LAN port. The corresponding LAN port is sending or receiving Blinking Speed data. 10/100 Data Rate Green Data is transmitting in 100Mbps on the corresponding LAN port. Reset To reset system settings to factory defaults AirLive WT-200R User’s Manual...

  • Page 9: Procedure For Hardware Installation

    M1 will be flashed 3 times to indicate that the self-test operation has finished. Finally, the M1 will be continuously flashed once per second to indicate that this product is in normal operation. AirLive WT-200R User’s Manual...

  • Page 10: Chapter 3 Network Settings And Software Installation

    Tip: The LAN LED of this product and the link LED of network card on your computer must be lighted. Is the TCP/IP environment of your computers properly configured? Tip: If the IP address of this product is 192.168.1.254, the IP address of your computer must be 192.168.1.X and default gateway must be 192.168.1.254. AirLive WT-200R User’s Manual...

  • Page 11: Chapter 4 Configuring Wireless Broadband Router

    This product provides Web based configuration scheme, that is, configuring by your Web browser, such as Netscape Communicator or Internet Explorer. This approach can be adopted in any MS Windows, Macintosh or UNIX based platforms. AirLive WT-200R User’s Manual...

  • Page 12: Start-Up And Log In

    After the connection is established, you will see the web user interface of this product. There are two appearances of web user interface: for general users and for system administrator. A window would pop-up asking for Login and Password. Please enter “admin” for login, and “airlive” for password.

  • Page 13: Status

    If the WAN port is assigned a dynamic IP, there may appear a “Renew” or “Release” button on the Sidenote column. You can click this button to renew or release IP manually. B. Statistics of WAN: enables you to monitor inbound and outbound packets AirLive WT-200R User’s Manual...

  • Page 14: Wizard

    4.3 Wizard Setup Wizard will guide you through a basic configuration procedure step by step.Press ”Next >” Setup Wizard - Select WAN Type: For detail settings, please refer to 4.4.1 primary setup. AirLive WT-200R User’s Manual...

  • Page 15: Basic Setting

    4.4 Basic Setting 4.4.1 Primary Setup – WAN Type, Virtual Computers Press “Change” AirLive WT-200R User’s Manual...
  • Page 16 Host Name: optional. Required by some ISPs, for example, @Home. Renew IP Forever: this feature enables this product to renew your IP address automatically when the lease time is expiring-- even when the system is idle. AirLive WT-200R User’s Manual...
  • Page 17 Manually:The device will not make the link until someone clicks the connect-button in the Staus-page. 4.4.1.5 PPTP First,Please check your ISP assigned and Select Static IP Address or Dynamic IP Address. My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned to you. AirLive WT-200R User’s Manual...
  • Page 18 ISP when the clients send outgoing packets. Auto-Reconnect(Always-on):The device will link upw with ISP until the connection is established. Manually:The device will not make the link until someone clicks the connect-button in the Staus-page. AirLive WT-200R User’s Manual...
  • Page 19 ISP when the clients send outgoing packets. Auto-Reconnect(Always-on):The device will link upw with ISP until the connection is established. Manually:The device will not make the link until someone clicks the connect-button in the Staus-page. AirLive WT-200R User’s Manual...
  • Page 20 4.4.1.7 Virtual Computers(Only for Static and dynamic IP address Wan type) Virtual Computer enables you to use the original NAT feature, and allows you to setup the one-to-one mapping of multiple global IP address and local IP address. AirLive WT-200R User’s Manual...
  • Page 21 Domain Name: Optional, this information will be passed to the client. Primary DNS/Secondary DNS: This feature allows you to assign DNS Servers Primary WINS/Secondary WINS: This feature allows you to assign WINS Servers Gateway: The Gateway Address would be the IP address of an alternate Gateway. AirLive WT-200R User’s Manual...
  • Page 22 4. WEP Security: Select the data privacy algorithm you want. Enabling the security can protect your data while it is transferred from one station to another. The standardized IEEE 802.11 WEP (128 or 64-bit) is used here. AirLive WT-200R User’s Manual...
  • Page 23 IP address or the 802.1X server’s domain-name. RADIUS Shared Key Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the RADIUS server. WPA-PSK 1. Select Encryntion and Preshare Key Mode AirLive WT-200R User’s Manual...
  • Page 24 If you select HEX,you have to fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits If ASCII,the length of preshare key is from 8 to 63. Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the RADIUS server. AirLive WT-200R User’s Manual...
  • Page 25 If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits If ASCII, the length of Pre-share key is from 8 to 63. 2. Fill in the key, Ex 12345678 AirLive WT-200R User’s Manual...
  • Page 26 If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits If ASCII, the length of Pre-share key is from 8 to 63. Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the RADIUS server. AirLive WT-200R User’s Manual...
  • Page 27 If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits If ASCII, the length of Pre-share key is from 8 to 63. 2. Fill in the key, Ex 12345678 AirLive WT-200R User’s Manual...
  • Page 28 If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits If ASCII, the length of Pre-share key is from 8 to 63. Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the RADIUS server. AirLive WT-200R User’s Manual...
  • Page 29 WDS operation as defined bythe IEEE802.11 standard has been made available. Using WDS it is possible to wirelessly connect Access Points, and in doing so extend a wired infrastructure to locations where cabling is not possible or inefficient to implement. AirLive WT-200R User’s Manual...

  • Page 30: Port Forwarding

    4.5 Port Forwarding 4.5.1 Virtual Server AirLive WT-200R User’s Manual...
  • Page 31 For example, if you have an FTP server (port 21) at 192.168.1.1, a Web server (port 80) at 192.168.1.2, and a VPN server at 192.168.1.6, then you need to specify the following virtual server mapping table: Service Port Server IP Enable 192.168.1.1 192.168.1.2 1723 192.168.1.6 AirLive WT-200R User’s Manual...
  • Page 32 This product provides some predefined settings Select your application and click Copy to to add the predefined setting to your list. Note! At any given time, only one PC can use each Special Application tunnel. AirLive WT-200R User’s Manual...

  • Page 33: Miscellaneous Items

    You have to configure this item if you want to access an FTP server whose port number is not 21. This setting will be lost after rebooting. UpnP Setting The device also supports this function.If the OS supports this function enable it,like Windows Xp.When the user get ip from Device and will see icon as below: AirLive WT-200R User’s Manual...

  • Page 34: Security Settings

    4.6 Security Settings AirLive WT-200R User’s Manual...

  • Page 35: Packet Filter

    Protocol: TCP or UDP or both. • Use Rule# For source or destination IP address, you can define a single IP address (4.3.2.1) or a range of IP addresses (4.3.2.1-4.3.2.254). An empty implies all IP addresses. AirLive WT-200R User’s Manual...
  • Page 36 (119) defined in Virtual Server or DMZ Host. Example 1: (1.2.3.100-1.2.3.149) They are allow to send mail (port 25), receive mail (port 110), and browse the Internet (port 80) (1.2.3.10-1.2.3.20) They can do everything (block nothing) AirLive WT-200R User’s Manual...
  • Page 37 Others are all allowed. After Inbound Packet Filter setting is configured, click the save button. Outbound Filter: To enable Outbound Packet Filter click the check box next to Enable in the Outbound Packet Filter field. Example 1: AirLive WT-200R User’s Manual...
  • Page 38 (192.168.1.100-192.168.1.149) They are allowed to send mail (port 25), receive mail (port 110), and browse Internet (port 80); port 53 (DNS) is necessary to resolve the domain name. (192.168.1.10-192.168.1.20) They can do everything (block nothing) Others are all blocked. AirLive WT-200R User’s Manual...
  • Page 39 Example 2: (192.168.1.100-192.168.1.119) They can do everything except read net news (port 119) and transfer files via FTP (port 21) Others are allowed After Outbound Packet Filter setting is configured, click the save button. AirLive WT-200R User’s Manual...

  • Page 40: Domain Filter

    A suffix of URL to be restricted. For example, ".com", "xxx.com". Action When someone is accessing the URL met the domain-suffix, what kind of action you want. Check drop to block the access. Check log to log these access. Enable Check to enable each rule. AirLive WT-200R User’s Manual...
  • Page 41 2. URL include “www.sina.com” will not be blocked, but the action will be record in log-file. 3. URL include “www.google.com” will be blocked, but the action will not be record in log-file. IP address X.X.X.1~ X.X.X.20 can access network without restriction. AirLive WT-200R User’s Manual...

  • Page 42: Url Blocking

    If any part of the Website's URL matches the pre-defined word, the connection will be blocked. For example, you can use pre-defined word "sex" to block all websites if their URLs contain pre-defined word "sex". Enable Checked to enable each rule. AirLive WT-200R User’s Manual...
  • Page 43 2. URL include “sina” will be blocked, but the action will be record in log-file 3. URL include “cnnsi” will not be blocked, but the action will be record in log-file. 4. URL include “espn” will be blocked, but the action will be record in log-file AirLive WT-200R User’s Manual...

  • Page 44: Mac Address Control

    LAN. If a client is denied to associate to the wireless LAN, it means the client can't send or receive any data via this device. Choose "allow" or "deny" to AirLive WT-200R User’s Manual...
  • Page 45 You can select a specific client in the “DHCP clients” Combobox, and then click on the “Copy to” button to copy the MAC address of the client you select to the ID selected in the “ID” Combobox. AirLive WT-200R User’s Manual...
  • Page 46 Previous page and Next Page To make this setup page simple and clear, we have divided the “Control table” into several pages. You can use these buttons to navigate to different pages. AirLive WT-200R User’s Manual...
  • Page 47 (192.168.1.101), it will be denied to connect to this device. 5.Clients 2 and 3 and other wired clients with a MAC address unspecified in the Control table are all allowed to connect to this device. But client 1 is denied to connect to this device. AirLive WT-200R User’s Manual...
  • Page 48 Discard PING from WAN side When this feature is enabled, any host on the WAN cannot ping this product. SPI Mode When this feature is enabled, the router will record the packet information pass through the router like IP address, AirLive WT-200R User’s Manual...

  • Page 49: Advanced Settings

    When this feature is enabled, the router will detect and log the DoS attack comes from the Internet. Currently, the router can detect the following DoS attack: SYN Attack, WinNuke, Port Scan, Ping of Death, Land Attack etc. 4.7 Advanced Settings AirLive WT-200R User’s Manual...
  • Page 50 Selected if you want to Set Date and Time manually. Set Date and Time manually Selected if you want to Set Date and Time manually. Function of Buttons Sync Now: Synchronize system time with network time server Daylight Saving:Set up where the location is. AirLive WT-200R User’s Manual...

  • Page 51: System Log

    Input the SMTP server IP and port, which are concated with ':'. If you do not specify port number, the default value is 25. For example, "mail.your_url.com" or "192.168.1.100:26". Send E-mail alert to The recipients who will receive these logs. You can assign more than 1 recipient, using ';' or ',' to separate these email addresses. AirLive WT-200R User’s Manual...

  • Page 52: Dynamic Dns

    To enable Dynamic DNS click the check box next to Enable in the DDNS field. Next you can enter the appropriate information about your Dynamic DNS Server. You have to define: Provider Host Name AirLive WT-200R User’s Manual...
  • Page 53 Username/E-mail Password/Key You will get this information when you register an account on a Dynamic DNS server. Example: After Dynamic DNS setting is configured, click the save button. AirLive WT-200R User’s Manual...

  • Page 54: Snmp Setting

    WAN Access IP Address IF the user wants to limit to specific the ip address to access,please input in the item.The default 0.0.0.0 and means every ip of Internet can get some information of device with snmp protocol. AirLive WT-200R User’s Manual...
  • Page 55 Static Routing: For static routing, you can specify up to 8 routing rules. You can enter the destination IP address, subnet mask, gateway, hop for each routing rule, and then enable or disable the rule by checking or unchecking the Enable checkbox. AirLive WT-200R User’s Manual...
  • Page 56 192.168.1.103 (a gateway), And if it sends Packets to 192.168.1.11 will go via 192.168.1.216 Each rule can be enabled or disabled individually. After routing table setting is configured, click the save button. AirLive WT-200R User’s Manual...
  • Page 57 4.7.6 Schedule Rule You can set the schedule time to decide which service will be turned on or off. Select the “enable” item. Press “Add New Rule” AirLive WT-200R User’s Manual...
  • Page 58 You can write a rule name and set which day and what time to schedule from “Start Time” to “End Time”. The following example configure “ftp time” as everyday 14:10 to 16:20 After configure Rule 1 AirLive WT-200R User’s Manual...
  • Page 59 Schedule Rule can be apply to Virtual server and Packet Filter, for example: Exanple1: Virtual Server – Apply Rule#1 (ftp time: everyday 14:10 to 16:20) Exanple2: Packet Filter – Apply Rule#1 (ftp time: everyday 14:10 to 16:20). AirLive WT-200R User’s Manual...

  • Page 60: Maintenance

    4.8 Maintenance AirLive WT-200R User’s Manual...
  • Page 61 4.8.1 Change Password You can change Password here. We strongly recommend you to change the system password for security reason. AirLive WT-200R User’s Manual...
  • Page 62 4.8.2 System Log You can View system log by clicking the View Log button AirLive WT-200R User’s Manual...
  • Page 63 You can backup your settings by clicking the Backup Setting button and save it as a bin file. Once you want to restore these settings, please click Firmware Upgrade button and use the bin file you saved. 4.8.5 Reset to default AirLive WT-200R User’s Manual...
  • Page 64 You can also reset this product to factory default by clicking the Reset to default button. 4.8.6 Reboot You can also reboot this product by clicking the Reboot button. 4.8.7 Miscellaneous Items AirLive WT-200R User’s Manual...
  • Page 65 00-11-22-33-44-55. Clicking "Wake up" button will make the router to send the wake-up frame to the target device immediately. Domain Name or IP Address for Ping Test Allow you to configure an IP, and ping the device. You can ping a secific IP to test whether it is alive. AirLive WT-200R User’s Manual...

  • Page 66: Appendix A Tcp/Ip Configuration For Windows 95/98

    3. Click Add button to add network component into your PC. 4. Double click Protocol to add TCP/IP protocol. 5. Select Microsoft item in the manufactures list. And choose TCP/IP in the Network Protocols. Click OK button to return to Network window. AirLive WT-200R User’s Manual...
  • Page 67 2. Double click Network icon. Select the TCP/IP line that has been associated to your network card in the Configuration tab of the Network window. 3. Click Properties button to set the TCP/IP protocol for this NAT Router. 4. Now, you have two setting methods: AirLive WT-200R User’s Manual...
  • Page 68 Select Obtain an IP address automatically in the IP Address tab. b. Don’t input any value in the Gateway tab. AirLive WT-200R User’s Manual...
  • Page 69 Select Specify an IP address in the IP Address tab. The default IP address of this product is 192.168.1.254. So please use 192.168.1.xxx (xxx is between 1 and 253) for IP Address field and 255.255.255.0 for Subnet Mask field. AirLive WT-200R User’s Manual...
  • Page 70 In the Gateway tab, add the IP address of this product (default IP is 192.168.1.254) in the New gateway field and click Add button. In the DNS Configuration tab, add the DNS values which are provided by the ISP into DNS Server Search Order field and click Add button. AirLive WT-200R User’s Manual...
  • Page 71 Note. Windows 2000 RADIUS server only supports PEAP after upgrade to service pack 3 and HotFix Q313664 (You can get more information from http://support.microsoft.com/default.aspx?scid=kb; en-us;313664 2 DUT Configuration: 1.Enable DHCP server. 2.WAN setting: static IP address. 3.LAN IP address: 192.168.1.254/24. 4.Set RADIUS server IP. AirLive WT-200R User’s Manual...

  • Page 72: Appendix B 802.1X Setting

    3.If choosing use smart card or the certificate as the EAP type, we select to use a certificate on this computer. (Fig 3) 4. We will change EAP type to fit the variable test condition. AirLive WT-200R User’s Manual...
  • Page 73 Figure 2: Enable IEEE 802.1X access control AirLive WT-200R User’s Manual...
  • Page 74 6. Windows XP will prompt that the authentication process is success or fail and end the authentication procedure. ( Fig 6) 7. Terminate the test steps when PC1 get dynamic IP and PING remote host successfully. AirLive WT-200R User’s Manual...
  • Page 75 3. Disable the wireless connection and enable again. 4.The DUT will send the user's certificate to the RADIUS server, and then send the message of authentication result to PC2. 5. Windows XP will prompt that the authentication process is success or fail AirLive WT-200R User’s Manual...

  • Page 76: Appendix C Wpa-Psk And Wpa

    4.Windows XP with Service Pack 1 allows 802.1x authentication only when data encryption function is enable. Wireless Router: LAN IP: 192.168.1.254 WAN IP: 192.168.122.216 Radius Server: 192.168.122.1 UserA : XP Wireless Card:Ti-11g Tool: Odyssey Client Manager Refer to: www.funk.com Download: http://www.funk.com/News&Events/ody_c_wpa_preview_pn.asp AirLive WT-200R User’s Manual...
  • Page 77 1. Go to the Web manager of Wireless Router to configure, like below: 2. Go to Odyssey Client Manager, first choose “Network” Before doing that, you should verify if the software can show the wireless card. Open “Adapters” AirLive WT-200R User’s Manual...
  • Page 78 3. Add and edit some settings: AirLive WT-200R User’s Manual...
  • Page 79 Method2: 1. First, patch windows XP and have to install “Service package 1” Patch: http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=5039ef4a-61e0-4c44-94f0-c25 c9de0ace9 2. Then reboot. 3. Setting on the router and client: Router: Client: Go to “Network Connection” and select wireless adapter. AirLive WT-200R User’s Manual...
  • Page 80 Choose “View available Wireless Networks” like below: Advanced choose “123kk” AirLive WT-200R User’s Manual...
  • Page 81 1. The UserA or UserB have to get certificate from Radius, first. http://192.168.122.1/certsrv account : fae1 passwd : fae1 2. Then, Install this certificate and finish. 3. Go to the Web manager of Wireless Router to configure, like below: AirLive WT-200R User’s Manual...
  • Page 82 4. Go to Odyssey Client Manager, choose “Profiles” and Setup Profile name as “1” Login name and passwd are fae1 and fae1. Remember that you get certificate from Radius in Step1. AirLive WT-200R User’s Manual...
  • Page 83 5. Then Choose “certificate” like above. 6. Then go to Authentication and first Remove EAP/ TLS and Add EAP/TLS again. AirLive WT-200R User’s Manual...
  • Page 84 7. Go “Network” and Select “1” and ok AirLive WT-200R User’s Manual...
  • Page 85 8. Back to Connection and Select “123kk. If successfully, the wireless client has to authenticate with Radius Server, like below: 9.Result: Method 2: 1. The UserA or UserB have to get certificate from Radius,first. http://192.168.122.1/certsrv account:fae1 passwd:fae1 AirLive WT-200R User’s Manual...
  • Page 86 3. Setting on the router and client: Router: Client: Go to “Network Connection” and select wireless adapter. Choose “View available Wireless Networks” like below: Advanced choose “123kk” Select “WirelessCA and Enable” in Trusted root certificate authority: AirLive WT-200R User’s Manual...
  • Page 87 Then, if the wireless client wants to associate, it has to request to authenticate. AirLive WT-200R User’s Manual...

  • Page 88: Appendix D Wds Setting

    If you can not find the information of Mac, please make the cable to plug in lan-port of ap and ping the lan ip address then arp –a. There are some information in the screen. For example: AP 1: AP2: AP3: IP:192.168.1.254 IP:192.168.1.253 IP:192.168.1.252 Mac:00-50-18-00-0f-fe Mac:00-50-18-00-0f-fd Mac:00-50-18-00-0f-fc SSID:Default SSID:Default SSID:Default Channel:11 Channel:11 Channel:11 Dhcp Server:Enable Blue Line:Wireless Black Line:Wire AirLive WT-200R User’s Manual...
  • Page 89 If the Settings are ok,the client1 and client2 can get ip from dhcp server of AP1.Then Client1 and Client2 can get information each other. AP1 Setting: AP2(Remote Mac: 00-50-18-00-0f-fd) AP3(Remote Mac: 00-50-18-00-0f-fc) AirLive WT-200R User’s Manual...
  • Page 90 AP2 Setting: AP1(Remote Mac: 00-50-18-00-0f-fe) AP3 Setting AP1(Remote Mac: 00-50-18-00-0f-fe) AirLive WT-200R User’s Manual...
  • Page 91 AirLive WT-200R User’s Manual...

  • Page 92: Appendix E Faq And Troubleshooting

    Then, please check if the Pc gets ip address from Router. Use command mode as below: If yes, please execute Browser, like Mozilla and key 192.168.1.254 in address. If not, please ipconfig /release, then ipconfig /renew. AirLive WT-200R User’s Manual...
  • Page 93 First, turn off the router and press the RESET button in. And then, power on the router and push the RESET button down until the M1 and or M2 LED (or Status LED) start flashing, then remove the finger. If LED flashes AirLive WT-200R User’s Manual...
  • Page 94 IP address. The Subnet mask must be 255.255.255.0, and the Default gateway must be 192.168.1.254. Then click “OK” button to complete TCP/IP setup. Step2: Open the command mode and input “cmd” then check if the router replies to ping 192.168.1.254 AirLive WT-200R User’s Manual...
  • Page 95 Lan port of router is plugged in Ethernet adapter. Then, please check which wan type you use. If you are not sure, please call the isp. Then please go to this page to input the information isp is assigned. AirLive WT-200R User’s Manual...
  • Page 96 202.93.91.218, But I can not access the site that inputs domain name, for example http://espn.com A: Please check the dns configuration of Static IP Address. Please refer to the information of ISP and assign one or two in dns item. AirLive WT-200R User’s Manual...

  • Page 97: How Do I Connect Router By Using Wireless

    If the client can not access your wireless router, please refresh network list again. However, I still can not fine the device which ssid is “default”, please refer to Q3. Choose the one that you will want to connect and Connect: AirLive WT-200R User’s Manual...
  • Page 98 A: First, you must check if the driver of wireless client supports AES encryption. Please refer to the below: If SSID is default and click “Properties” to check if the driver of wireless client supports AES encryption. AirLive WT-200R User’s Manual...
  • Page 99 3.When I use wireless to connect the router, but I find the signal is very low even if I am close to the router? A: Please check if the wireless client is normal, first. If yes, please send the unit to the seller and verify What the problem is. AirLive WT-200R User’s Manual...

Table of Contents