AirLive WT-2000R User Manual

AirLive WT-2000R User Manual

Turbo 802.11g wireless broadband router
Hide thumbs Also See for WT-2000R:

Advertisement

WT-2000R
Turbo 802.11g
Wireless Broadband Router
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WT-2000R and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for AirLive WT-2000R

  • Page 1 WT-2000R Turbo 802.11g Wireless Broadband Router User’s Manual...
  • Page 2: Declaration Of Conformity

    5F., NO.6, Lane 130, Min-Chuan Rd., Hsin-Tien City, Taipei County, Taiwan Declare that the product Turbo 802.11g Wireless Broadband Router AirLive WT-2000R / WT-2000AP is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause Description Electromagnetic compatibility and Radio spectrum Matters (ERM);...
  • Page 3 Hereby, OvisLink Corp., declares that this AirLive Niniejszym OvisLink Corp oświadcza, że AirLive WT- English WT-2000R/WT-2000AP is in compliance with the Polski [Polish] 2000R/WT-2000AP jest zgodny z zasadniczymi essential requirements and other relevant wymogami oraz pozostałymi stosownymi provisions of Directive 1999/5/EC.
  • Page 4: Fcc Interference Statement

    CE Declaration of Conformity This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022/A1 Class B. The specification is subject to change without notice. AirLive WT-2000R User’s Manual...
  • Page 5: Table Of Contents

    4.8.5 Reset to default ................. 48 4.8.6 Reboot....................49 4.8.7 Miscellaneous Items................49 Appendix A: TCP/IP Configuration for Windows 95/98..........50 Appendix B: 802.1x Setting ..................55 Appendix D: WDS Setting..................69 Appendix E: FAQ and Troubleshooting ..............72 AirLive WT-2000R User’s Manual...
  • Page 6: Chapter 1: Introduction

    54M, 48M, 36M, 24M, 18M, 12M, 6M data rate with auto fallback in 802.11g mode. 11M, 5.5M, 2M, 1M data rate with auto fallback in 802.11b mode. Security functions Packet filter supported Packet Filter allows you to control access to a network by analyzing the incoming and AirLive WT-2000R User’s Manual...
  • Page 7: Packing List

    Other functions UPNP (Universal Plug and Play)Supported The router also supports this function. The applications: X-box, Msn Messenger. 1.2 Packing List Wireless broadband router unit Installation CD-ROM Power adapter CAT-5 UTP Fast Ethernet cable AirLive WT-2000R User’s Manual...
  • Page 8: Chapter 2: Hardware Installation

    Figure 2-1 Front Panel LED: Ports: Port Description Power inlet the port where you will connect your cable (or DSL) modem or Ethernet router. Port 1-4 the ports where you will connect networked computers and other devices. AirLive WT-2000R User’s Manual...
  • Page 9: Rear Panel

    Link status Green LAN port. The corresponding LAN port is sending or receiving Blinking Speed data. Data Rate Green 10/100 Data is transmitting in 100Mbps on the corresponding LAN port. Reset To reset system settings to factory defaults AirLive WT-2000R User’s Manual...
  • Page 10: Procedure For Hardware Installation

    ON for about 10 seconds, and then M1 will be flashed 3 times to indicate that the self-test operation has finished. Finally, the M1 will be continuously flashed once per second to indicate that this product is in normal operation. AirLive WT-2000R User’s Manual...
  • Page 11: Chapter 3: Network Settings And Software Installation

    2. Is the TCP/IP environment of your computers properly configured? Tip: If the IP address of this product is 192.168.1.254, the IP address of your computer must be 192.168.1.X and default gateway must be 192.168.1.254. AirLive WT-2000R User’s Manual...
  • Page 12: Chapter 4: Configuring Wireless Broadband Router

    Router This product provides Web based configuration scheme, that is, configuring by your Web browser, such as Netscape Communicator or Internet Explorer. This approach can be adopted in any MS Windows, Macintosh or UNIX based platforms. AirLive WT-2000R User’s Manual...
  • Page 13: Start-Up And Log In

    If the WAN port is assigned a dynamic IP, there may appear a “Renew” or “Release” button on the Sidenote column. You can click this button to renew or release IP manually. B. Statistics of WAN: enables you to monitor inbound and outbound packets AirLive WT-2000R User’s Manual...
  • Page 14: Wizard

    4.3 Wizard Setup Wizard will guide you through a basic configuration procedure step by step.Press ”Next >” Setup Wizard - Select WAN Type: For detail settings, please refer to 4.4.1 primary setup. AirLive WT-2000R User’s Manual...
  • Page 15: Basic Setting

    4.4 Basic Setting 4.4.1 Primary Setup – WAN Type, Virtual Computers Press “Change” AirLive WT-2000R User’s Manual...
  • Page 16 WAN Type is Dynamic IP Address. If the WAN type is not correct, change it! Host Name: optional. Required by some ISPs, e.g. @Home. Renew IP Forever: this feature enable this product renew IP address automatically when the lease time is being expired even the system is in idle state. AirLive WT-2000R User’s Manual...
  • Page 17 Connect-on-demand: The device will link up with ISP when the clients send outgoing packets. Auto-Reconnect (Always-on): The device will link up with ISP until the connection is established. Manually: The device will not make the link until someone clicks the connect-button in the Status-page. AirLive WT-2000R User’s Manual...
  • Page 18 ISP when the clients send outgoing packets. Auto-Reconnect (Always-on):The device will link up with ISP until the connection is established. Manually: The device will not make the link until someone clicks the connect-button in the Status-page. AirLive WT-2000R User’s Manual...
  • Page 19 Global IP: Enter the global IP address assigned by your ISP. • Local IP: Enter the local IP address of your LAN PC corresponding to the global IP address. • Enable: Check this item to enable the Virtual Computer feature. AirLive WT-2000R User’s Manual...
  • Page 20: Dhcp Server

    Primary WINS/Secondary WINS: This feature allows you to assign WINS Servers Gateway: The Gateway Address would be the IP address of an alternate Gateway. This function enables you to assign another gateway to your PC, when DHCP server offers an IP to your PC. AirLive WT-2000R User’s Manual...
  • Page 21: Wireless Setting, 802.1X Setting And Wds

    26 or 10 hexadecimal (0, 1, 2…8, 9, A, B…F) digits. 6. Pass-phrase Generator: Since hexadecimal characters are not easily remembered, this device offers a conversion utility to convert a simple word or phrase into hex. 6. 802.1X Setting AirLive WT-2000R User’s Manual...
  • Page 22 1. Select Encryntion and Preshare Key Mode If you select HEX,you have to fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits If ASCII,the length of preshare key is from 8 to 63. 2. Fill in the key, Ex 12345678 AirLive WT-2000R User’s Manual...
  • Page 23 If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits If ASCII, the length of Pre-share key is from 8 to 63. 2. Fill in the key, Ex 12345678 AirLive WT-2000R User’s Manual...
  • Page 24 If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits If ASCII, the length of Pre-share key is from 8 to 63. 2. Fill in the key, Ex 12345678 AirLive WT-2000R User’s Manual...
  • Page 25 WDS operation as defined by the IEEE802.11 standard has been made available. Using WDS it is possible to wirelessly connect Access Points, and in doing so extend a wired infrastructure to locations where cabling is not possible or inefficient to implement. AirLive WT-2000R User’s Manual...
  • Page 26: Port Forwarding

    A virtual server is defined as a Service Port, and all requests to this port will be redirected to the computer specified by the Server IP. Virtual Server can work with Scheduling Rules, and give user more flexibility on Access control. For Detail, please refer to Scheduling Rule. AirLive WT-2000R User’s Manual...
  • Page 27: Special Ap

    This product provides some predefined settings Select your application and click Copy to to add the predefined setting to your list. Note! At any given time, only one PC can use each Special Application tunnel. AirLive WT-2000R User’s Manual...
  • Page 28: Miscellaneous Items

    UpnP Setting The device also supports this function. If the OS supports this function enable it, like Windows Xp. When the user get ip from Device and will see icon as below: AirLive WT-2000R User’s Manual...
  • Page 29: Security Settings

    Packet Filter enables you to control what packets are allowed to pass the router. Outbound filter applies on all outbound packets. However, Inbound filter applies on packets that destined to Virtual Servers or DMZ host only. You can select one of the two filtering policies: AirLive WT-2000R User’s Manual...
  • Page 30 Server (119) defined in Virtual Server or DMZ Host. Example 1: (1.2.3.100-1.2.3.149) They are allow to send mail (port 25), receive mail (port 110), and browse the Internet (port 80) (1.2.3.10-1.2.3.20) They can do everything (block nothing) Others are all blocked. AirLive WT-2000R User’s Manual...
  • Page 31 Others are all allowed. After Inbound Packet Filter setting is configured, click the save button. Outbound Filter: To enable Outbound Packet Filter click the check box next to Enable in the Outbound Packet Filter field. Example 1: AirLive WT-2000R User’s Manual...
  • Page 32 Others are all blocked. Example 2: (192.168.1.100-192.168.1.119) They can do everything except read net news (port 119) and transfer files via FTP (port 21) Others are allowed After Outbound Packet Filter setting is configured, click the save button. AirLive WT-2000R User’s Manual...
  • Page 33: Domain Filter

    A suffix of URL to be restricted. For example, ".com", "xxx.com". Action When someone is accessing the URL met the domain-suffix, what kind of action you want. Check drop to block the access. Check log to log these access. Enable Check to enable each rule. AirLive WT-2000R User’s Manual...
  • Page 34 2. URL include “www.sina.com” will not be blocked, but the action will be record in log-file. 3. URL include “www.google.com” will be blocked, but the action will not be record in log-file. IP address X.X.X.1~ X.X.X.20 can access network without restriction. AirLive WT-2000R User’s Manual...
  • Page 35: Url Blocking

    If any part of the Website's URL matches the pre-defined word, the connection will be blocked. For example, you can use pre-defined word "sex" to block all websites if their URLs contain pre-defined word "sex". Enable Check to enable each rule. AirLive WT-2000R User’s Manual...
  • Page 36 2. URL include “sina” will be blocked, but the action will be record in log-file 3. URL include “cnnsi” will not be blocked, but the action will be record in log-file. 4. URL include “espn” will be blocked, but the action will be record in log-file AirLive WT-2000R User’s Manual...
  • Page 37: Mac Address Control

    "Control table" is the table at the bottom of the "MAC Address Control" page. Each row of this table indicates the MAC address and the expected IP address mapping of a client. There are four columns in this table: AirLive WT-2000R User’s Manual...
  • Page 38 MAC address of the client you select to the ID selected in the “ID” Combobox. Previous page and Next Page To make this setup page simple and clear, we have divided the “Control table” into several pages. You can use these buttons to navigate to different pages. AirLive WT-2000R User’s Manual...
  • Page 39 6.Clients 1 and 2 are allowed to associate to the wireless LAN, but a wireless client with a MAC address not specified in the Control table is denied to associate to the wireless LAN. Client 3 is a wired client and so is not affected by Association control. AirLive WT-2000R User’s Manual...
  • Page 40: Miscellaneous Items

    When this feature is enabled, the router will detect and log the DoS attack comes from the Internet. Currently, the router can detect the following DoS attack: SYN Attack, WinNuke, Port Scan, Ping of Death, Land Attack etc. AirLive WT-2000R User’s Manual...
  • Page 41: Advanced Settings

    4.7 Advanced Settings 4.7.1 System Time Get Date and Time by NTP Protocol Selected if you want to Get Date and Time by NTP Protocol. Time Server AirLive WT-2000R User’s Manual...
  • Page 42: System Log

    Input the SMTP server IP and port, which are connected with ':'. If you do not specify port number, the default value is 25. For example, "mail.your_url.com" or "192.168.1.100:26". Send E-mail alert to The recipients will receive these logs. You can assign more than 1 recipient,using ';' or ',' to separate these email addresses. AirLive WT-2000R User’s Manual...
  • Page 43: Dynamic Dns

    Next you can enter the appropriate information about your Dynamic DNS Server. You have to define: Provider Host Name Username/E-mail Password/Key You will get this information when you register an account on a Dynamic DNS server. Example: After Dynamic DNS setting is configured, click the save button. AirLive WT-2000R User’s Manual...
  • Page 44: Snmp Setting

    WAN Access IP Address IF the user wants to limit to specific the ip address to access,please input in the item.The default 0.0.0.0 and means every ip of Internet can get some information of device with snmp protocol. AirLive WT-2000R User’s Manual...
  • Page 45: Routing

    Static Routing: For static routing, you can specify up to 8 routing rules. You can enter the destination IP address, subnet mask, gateway, hop for each routing rule, and then enable or disable the rule by checking or unchecking the Enable checkbox. Example: AirLive WT-2000R User’s Manual...
  • Page 46: Schedule Rule

    Press “Add New Rule” You can write a rule name and set which day and what time to schedule from “Start Time” to “End Time”. The following example configure “ftp time” as everyday 14:10 to 16:20 AirLive WT-2000R User’s Manual...
  • Page 47 To delete the schedule rule, and the rule# of the rules behind the deleted one will decrease one automatically. Schedule Rule can be apply to Virtual server and Packet Filter, for example: Exanple1: Virtual Server – Apply Rule#1 (ftp time: everyday 14:10 to 16:20) AirLive WT-2000R User’s Manual...
  • Page 48: Maintenance

    Exanple2: Packet Filter – Apply Rule#1 (ftp time: everyday 14:10 to 16:20). 4.8 Maintenance AirLive WT-2000R User’s Manual...
  • Page 49: Change Password

    4.8.1 Change Password You can change Password here. We strongly recommend you to change the system password for security reason. 4.8.2 System Log You can View system log by clicking the View Log button AirLive WT-2000R User’s Manual...
  • Page 50: Firmware Upgrade

    Firmware Upgrade button and use the bin file you saved. 4.8.5 Reset to default You can also reset this product to factory default by clicking the Reset to default button. AirLive WT-2000R User’s Manual...
  • Page 51: Reboot

    Domain Name or IP Address for Ping Test Allow you to configure an IP, and ping the device. You can ping a secific IP to test whether it is alive. AirLive WT-2000R User’s Manual...
  • Page 52: Appendix A: Tcp/Ip Configuration For Windows 95/98

    5. Select Microsoft item in the manufactures list. And choose TCP/IP in the Network Protocols. Click OK button to return to Network window. 6. The TCP/IP protocol shall be listed in the Network window. Click OK to complete the install procedure and restart your PC to enable the TCP/IP protocol. AirLive WT-2000R User’s Manual...
  • Page 53 2. Double click Network icon. Select the TCP/IP line that has been associated to your network card in the Configuration tab of the Network window. 3. Click Properties button to set the TCP/IP protocol for this NAT Router. 4. Now, you have two setting methods: AirLive WT-2000R User’s Manual...
  • Page 54 Select Obtain an IP address automatically in the IP Address tab. b. Don’t input any value in the Gateway tab. AirLive WT-2000R User’s Manual...
  • Page 55 192.168.1.254. So please use 192.168.1.xxx (xxx is between 1 and 253) for IP Address field and 255.255.255.0 for Subnet Mask field. b. In the Gateway tab, add the IP address of this product (default IP is 192.168.1.254) in the New gateway field and click Add button. AirLive WT-2000R User’s Manual...
  • Page 56 In the DNS Configuration tab, add the DNS values which are provided by the ISP into DNS Server Search Order field and click Add button. AirLive WT-2000R User’s Manual...
  • Page 57: Appendix B: 802.1X Setting

    The following test will use the inbuilt 802.1X authentication method such as ,EAP_TLS, PEAP_CHAPv2(Windows XP with SP1 only), and PEAP_TLS(Windows XP with SP1 only) using the Smart Card or other Certificate of the Windows XP Professional. AirLive WT-2000R User’s Manual...
  • Page 58 3. If choosing use smart card or the certificate as the EAP type, we select to use a certificate on this computer. (Fig 3) 4. We will change EAP type to fit the variable test condition. Figure 2: Enable IEEE 802.1X access control Figure 3: Smart card or certificate properties AirLive WT-2000R User’s Manual...
  • Page 59 6. Windows XP will prompt that the authentication process is success or fail and end the authentication procedure. ( Fig 6) 7. Terminate the test steps when PC1 get dynamic IP and PING remote host successfully. Figure 4: Certificate information on PC1 Figure 5: Authenticating AirLive WT-2000R User’s Manual...
  • Page 60 2.PC2 is on Windows XP platform with Service Pack 1a. 3.PEAP is supported on Windows XP with Service Pack 1 only. 4.Windows XP with Service Pack 1 allows 802.1x authentication only when data encryption function is enable. AirLive WT-2000R User’s Manual...
  • Page 61 UserA : XP Wireless Card:Ti-11g Tool: Odyssey Client Manager Refer to: www.funk.com Download: http://www.funk.com/News&Events/ody_c_wpa_preview_pn.asp Or Another Configuration: PA-PSK In fact, it is not necessary for this function to authenticate by Radius Server, the client and wireless Router authenticate by themselves. AirLive WT-2000R User’s Manual...
  • Page 62 1. Go to the Web manager of Wireless Router to configure, like below: 2. Go to Odyssey Client Manager, first choose “Network” Before doing that, you should verify if the software can show the wireless card. Open “Adapters” 3. Add and edit some settings: AirLive WT-2000R User’s Manual...
  • Page 63 4. Back to Connection: Then Select “Connect to network” You will see: Method2: 1. First, patch windows XP and have to install “Service package 1” AirLive WT-2000R User’s Manual...
  • Page 64 Patch: http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=5039ef4a-61e0-4c44- 94f0-c25c9de0ace9 2. Then reboot. 3. Setting on the router and client: Router: Client: Go to “Network Connection” and select wireless adapter. Choose “View available Wireless Networks” like below: Advanced choose “123kk” AirLive WT-2000R User’s Manual...
  • Page 65 1. The User A or User B have to get certificate from Radius, first. http://192.168.122.1/certsrv Account: fae1 Password: fae1 2. Then, Install this certificate and finish. 3. Go to the Web manager of Wireless Router to configure, like below: AirLive WT-2000R User’s Manual...
  • Page 66 4. Go to Odyssey Client Manager, choose “Profiles” and Setup Profile name as “1” Login name and passwd are fae1 and fae1. Remember that you get certificate from Radius in Step1. 5. Then Choose “certificate” like above. AirLive WT-2000R User’s Manual...
  • Page 67 Then go to Authentication and first Remove EAP/ TLS and Add EAP/TLS again. AirLive WT-2000R User’s Manual...
  • Page 68 7. Go “Network” and Select “1” and ok 8. Back to Connection and Select “123kk. If successfully, the wireless client has to authenticate with Radius Server, like below: AirLive WT-2000R User’s Manual...
  • Page 69 Result: Method 2: 1. The UserA or UserB have to get certificate from Radius,first. http://192.168.122.1/certsrv account:fae1 passwd:fae1 2. Then Install this certificate and finish. 3. Setting on the router and client: Router: AirLive WT-2000R User’s Manual...
  • Page 70 Go to “Network Connection” and select wireless adapter. Choose “View available Wireless Networks” like below: Advanced choose “123kk” Select “WirelessCA and Enable” in Trusted root certificate authority: Then, if the wireless client wants to associate, it has to request to authenticate. AirLive WT-2000R User’s Manual...
  • Page 71: Appendix D: Wds Setting

    –a. There are some information in the screen. For example: AP 1: AP2: AP3: IP:192.168.1.254 IP:192.168.1.253 IP:192.168.1.252 Mac:00-50-18-00-0f-fe Mac:00-50-18-00-0f-fd Mac:00-50-18-00-0f-fc SSID:Default SSID:Default SSID:Default Channel:11 Channel:11 Channel:11 Dhcp Server:Enable Blue Line:Wireless Black Line:Wire AirLive WT-2000R User’s Manual...
  • Page 72 If the Settings are ok,the client1 and client2 can get ip from dhcp server of AP1.Then Client1 and Client2 can get information each other. AP1 Setting: AP2(Remote Mac: 00-50-18-00-0f-fd) AP3(Remote Mac: 00-50-18-00-0f-fc) AirLive WT-2000R User’s Manual...
  • Page 73 AP2 Setting: AP1(Remote Mac: 00-50-18-00-0f-fe) AP3 Setting AP1(Remote Mac: 00-50-18-00-0f-fe) AirLive WT-2000R User’s Manual...
  • Page 74: Appendix E: Faq And Troubleshooting

    If yes, please execute Browser, like Mozilla and key 192.168.1.254 in address. If not, please ipconfig /release, then ipconfig /renew. Whatever I setup, the pc can not get ip. Please check Status Led and refer to the Q2: AirLive WT-2000R User’s Manual...
  • Page 75 If LED flashes about 8 times, the RESTORE process is completed. However, if LED flashes 2 times, repeat. 2. Restore directly when the router power on First, push the RESET button about 5 seconds (Status will start flashing about 5 times), remove the finger. The RESTORE process is completed. AirLive WT-2000R User’s Manual...
  • Page 76 192.168.1.254. Then click “OK” button to complete TCP/IP setup. Step2: Open the command mode and input “cmd” then check if the router replies to ping 192.168.1.254 Step3: Please use the exe-file of fw and click as below: AirLive WT-2000R User’s Manual...
  • Page 77 Lan port of router is plugged in Ethernet adapter. Then, please check which wan type you use. If you are not sure, please call the isp. Then please go to this page to input the information isp is assigned. AirLive WT-2000R User’s Manual...
  • Page 78 A: First, make sure that you already installed wireless client device in your computer. Then check the Configuration of wireless router. The default is as below: About wireless client, you will see wireless icon: Then click and will see the ap list that wireless client can be accessed: AirLive WT-2000R User’s Manual...
  • Page 79 If the client can not access your wireless router, please refresh network list again. However, I still can not fine the device which ssid is “default”, please refer to Q3. Choose the one that you will want to connect and Connect: If successfully, the computer will show and get ip from router: AirLive WT-2000R User’s Manual...
  • Page 80 3.When I use wireless to connect the router, but I find the signal is very low even if I am close to the router? A: Please check if the wireless client is normal, first. If yes, please send the unit to the seller and verify What the problem is. AirLive WT-2000R User’s Manual...

Table of Contents