Table of Contents
Advertisement
Installation
Mains Cable
In the event of damage to the appliance's electrical
cord, to avoid risks only an authorised service
company recommended by the supplier or a
qualified person may adjust it.
Unpacking
Unpack the cabinet and check that it is in good
condition and free of any transport damage. Notify
the dealer immediately of any damage. Hand the
packaging over for recycling. For more information,
contact your local city office or the dealer.
Do not allow children to play with the
packaging. The plastic film can cause
suffocation.
Before installing the cabinet
Affix the supplied plastic peaces at the rear of the
cabinet.
Remove the transport supports
Remove the transport supports placed
along the door sides
inside the hinges
Cleaning
Wash the inside of the cabinet using lukewarm
water, a mild washing-up detergent and a soft cloth.
Mounting of door panels
The door can be decorated with panels. If youcabinet
is not equipped with door frames, they can be
orderd seperately.
1. Remove the handel and the frame of the side
where the handle is fitted.
2 Loosen the screws of the other frames.
3 Adjust the panel and screw it in place.
4. Mount the removed frame and the handle.
Measurements fo the door panels:
Height
(mm)
EUP3100
1636
Width
Depth
(mm)
(mm)
584
4max
20
GB
Electrolux 818 19 28-01/4
Advertisement
Table of Contents
