Connect The Base And Charge The Handset - Uniden ELITE 8815 Series Owner's Manual

Connect the base and charge the handset

1) Connect the AC adapter to the AC ADAPTER
Place the base close to the AC outlet to
avoid long extension cords.
2) Connect the AC adapter to a continuous
power supply (i.e.,an outlet that is not
controlled by a switch).
3) Close the handset and place it in the base
with the smaller LCD screen facing forward.
4) Make sure that the charge LED illuminates.
If the LED does not illuminate, check to see that the AC adapter is plugged in and the
handset makes good contact with the base charging contacts.
5) Charge your handset at least 10 hours before plugging into the phone line.
jack.
To AC ADAPTER
[10]
Use only the
!
supplied AAD-
8815 AC adapter.
Do not use any
other AC adapter.
Do not place the
!
power cord where it
creates a trip
hazard or where it
could become
chafed and create a
fire or electrical
hazard.
Don't place the
!
base in direct
sunlight or subject it
to high
temperatures. The
battery may not
charge properly.