Uniden ELITE 8815 Series Owner's Manual page 42

Viewing Property of the Handset
To view the handset information, follow the following steps.
1) When the phone is in standby mode, press
2) Select the Bluetooth icon.
3) Use the up/down key to select
The handset name and serial number are displayed.
To go back to the Bluetooth setting display, press
To reconnect the Bluetooth Headset
If a paired headset will not connect to the handset, you can reconnecting to the
headset.
1) Make sure that Bluetooth is turned ON (see page 38).
2) When the phone is in standby mode, press
the handset.
3) Select the Bluetooth icon.
4) Use the up/down key to select
menu/select .
5) Press the OPTIONS soft key and select
6) Use the up/down key to select
select . You will hear a confirmation tone, and
[39]
menu/select on the handset.
, and then press menu/select
My Handset
back/hold/int'com
XXXXX 1234
menu/select on
<0123456789AB>
Headset, and then press
Reconnect
Reconnect .
Deregister
, and then press menu/
Yes
appears.
Done!
.
.
Headset
OPTIONS
<Options>
SELECT