Connect The Base And Charge The Handset - Uniden ELBT 595 Series Owner's Manual

note
•Use only the supplied
AD-0009 AC adapter.
Do not use any other
AC adapter.
•Do not place the power
cord where it creates a
trip hazard or where it
could become chafed
and create a fire or
electrical hazard.
•Don't place the base in
direct sunlight or
subject it to high
temperatures. The
battery may not charge
properly.
If your telephone
outlet isn't modular,
contact your
telephone company.
w w w . u n i d e n . c o m

Connect the base and charge the handset

1) Connect the AC adapter to the DC IN 9V jack.
Place the base close to the AC outlet to avoid
long extension cords.
2) Connect the AC adapter to a continuous power
supply (i.e., an outlet that is not controlled by a
switch).
3) Close the handset and place it in the base with
the smaller LCD screen facing forward.
4) Make sure that the charge LED illuminates.
If the LED does not illuminate, check to see that the AC adapter is plugged in and the
handset makes good contact with the base charging contacts.
5) Charge your handset at least 10 hours before plugging into the phone line.
6) Once the handset battery pack is fully charged,
connect the telephone line cord to the TEL LINE
jack and to a telephone outlet.
S e t t i n g u p t h e P h o n e [ 1 0 ]